Hawking Technology HGS24S manual In-Band Connections Web Browser / Telnet

Page 12

In-Band Connections (Web Browser / Telnet)

To manage the switch through in-band access, you should configure the management station with an IP address and subnet mask compatible with your switch.

1.Run your Web Browser and enter the IP address “192.168.1.1” as the URL in the “address” field.

2.Key in the User name and password to pass the authentication. The factory default User Name and Password are both “admin”.

3. After the authentication procedure, the switch’s homepage will appear.

12

Image 12

Contents Please place main product Photo here FCC Warning CE Mark WarningVlan Page General Description Gigabit Ethernet TechnologySpeed Duplex Mode Front PanelPort Operation Wiring for 10/100/1000Mbps Copper Media Speed WiringLED Definition LEDs Status StatementDesktop Installation Rack-Mount InstallationInstalling Network Cables Switch-to-Switch ConnectionsStation Connections Network ApplicationPHY Monitoring and Port Mode Setup Quality of ServiceFlow Control AgingAccess the Switch Console Port Out-of-band connectionIn-Band Connections Web Browser / Telnet Homepage Page System Ports VLANs Pvid Page Aggregation/Trunking Configuration Quality of Service QoS TOS Configuration 5 QosQoS Port Shaper QoS Port Policer Mirror Statistics DiscoveryAuto Search Manual AddDefault RebootTransmission Mode Temperature Operating HumidityPower Supply Standard