Hawking Technology 1000M instruction

Step 1. Place the H-GS5T on a smooth surface.

Step 2. Connect the Power Adapter to the unit. (At this point, do not plug the adapter into the outlet.)

Step 3. Connect a server, workstation, or PC to the switch using a standard RJ-45 Ethernet cable. (For best results, use a CAT 5E cable.)

Step 4. Repeat Step 3 as necessary for the remaining ports. Also, if needed, another hub/switch can be connected to any port on the unit.

Step 5. Ensure that each device is connected properly. Plug the power adapter into the power outlet.

Note: Make sure that there is proper heat dissipation from and adequate ventilation around the switch.