Unpacking
When unpacking your Digital Clock, check to make sure that the product is intact and undamaged. If any parts are missing or broken, please call HARBOR FREIGHT TOOLS at:
Operation
Your Digitial Clock requires no assembly. It is important that you read the entire manual to become familiar with the product BEFORE you use the Digital Clock.
Installing and Replacing the Battery
1.Press down on the release tab on the back of the Clock to open the Battery
2.Insert two “AA” batteries (not included) and line up polarity with the markings indicated in Battery Compartment.
3.When the Battery is running low, the LCD readout will become light and difficult to read. This indicates that the battery needs replacing.
Digital Clock Functions
1.Calendar: Date can be set to any date up to 2099.
2.Alarm Tone: The alarm can be set for any time. The alarm tone will continously ring for one minute.
3.Snooze Button: Snooze can be turned “On” or “Off” as desired.
4.
5.Thermometer: The Thermometer will give readings from
50º C/122º F.
6.Time Readout: Time can be set to either military or standard time (12 hours or 24 hour periods).
|
| Figure 1 |
|
Wall |
|
|
|
Mount hole |
|
| |
| Up | C/F |
|
|
| Down |
|
| Mode | Snooze |
|
| Leg | Battery |
|
| Compartment |
| |
|
|
| |
SKU 94738 | For technical questions please call | Page 3 | |