Add New Hardware Wizard USB Audio Device

Add New Hardware Wizard - USB Audio Device

11. Next, the	13. Windows
Wizard automatical-	searches for new
ly installs the USB	drivers in a specific
Audio Device. The	location. Uncheck
Add New	all the boxes.
Hardware Wizard	Click Next.
indicates that it has
found the USB
Audio Device.
Click Next.

12.The Wizard prompts you to search for the best driver for your device or select the driver you want from a list. Select

Search for the best driver for your device.

Click Next.

14.The Wizard indicates that it is ready to install the best driver for this device. Click Next to install the driver.

15. Click Finish when the Wizard is complete.

If the Wizard Cannot Locate the Driver

Headsets

16.If the Add New Hardware Wizard cannot locate the driver, insert your Windows Operating System CD-ROM into the CD- ROM drive. Once inserted, press Back, and check the box for your CD-ROM drive (usually D). Click Next. Click Finish when the Wizard is complete.

If the Wizard still does not locate the driver, go to the GN Netcom website at www.gnnetcom.com/usb or contact GN Netcom customer service at 1-800-826-4656for help and additional information.

Note: Do not unplug the USB connector from the computer while an application that uses USB audio is running. This could cause a system crash.

The GN8110-USB is designed to work with GN Netcom profes- sional headsets equipped with a Quick Disconnect (QD) which mates to the Quick Disconnect jack on the device. Disconnecting at the Quick Disconnect allows you to walk away from your computer without removing your headset.

Before using your headset, join the Quick Disconnect to the mating connector on the GN8110-USB as shown.