Thermal Relay Overload Amp, Button | Grizzly G4573 specification

Thermal Relay Overload Amp	When pushed, the contactor	ON	Button:	When	pushed,
Adjustment Dial: Turn this dial	is manually closed for trouble-	power is sent to the			magnetic
to the amperage setting speci-	shooting purposes only.	field	coil, closing the		contactor
fied by the motor manufacturer.		and sending power to the motor.
Typically, this setting is 100–
110% of the amperage load listed
on the motor data plate. Please		Manual/Auto Reset Lever: In
note that turning this dial has		the up position, the thermal relay
no effect on increasing motor		is in manual reset mode. This
horsepower. If turned too high,		means you must re-install the
the motor can overheat and be		outside cover and push the red
damaged before the relay trips.		OFF button, then push the green
		ON button to reset the thermal
Trip Indicator: If this window		relay. In the down position, the
Trip Indicator: If this window		thermal relay		will automatically
turns yellow, the thermal relay		reset when it has cooled.
has tripped.
Manual Trip Test Lever: If the		Reset Button: When			pushed,
thermal relay function is in ques-		the thermal relay is reset, clear-
tion, run the motor and use a		ing the yellow trip indicator win-
wooden toothpick to slide the		dow.
yellow test lever to the left. If the
motor shuts off, the thermal relay
has tripped and is functional.	OFF Button: When pushed, the current going to the magnetic field
	coil is cut, which opens the contactor and cuts power to the motor.

6 7

5	2	2-1V2

Warning: No portion of this manual may be reproduced in any shape

Or form without the written approval of Grizzly Industrial, inc.

#CR10355 printed in TAIWAN

-2-	G4573 Magnetic Switch

Thermal Relay Overload Amp