LevelOne GSW-2474T, GSW-1674T manual Front Panel, Identifying External Components, LED Indicator

IDENTIFYING EXTERNAL COMPONENTS

This chapter describes the front panel, rear panel, and LED indicators of LevelOne GSW-1674T/2474T.

Front Panel

The figure below shows the front panels of the Switch.

Figure 3. Front panel of GSW-1674T 16-port Gigabit Ethernet Switch

Figure 4. Front panel of GSW-2474T 24-port Gigabit Ethernet Switch

LED Indicator:

Comprehensive LED indicators display the status of GSW- 1674T/2474T and the network (see the LED Indicators chapter below).

Gigabit Ethernet Ports (Port 1~16/24):

The Switch 16/24 Gigabit twisted pair ports, supported auto negotiable 10/100/1000Mbps and auto MDI/MDIX crossover detection function, this

function gives true “plug and play” capability, just need to plug-in the network cable to the hub directly and don’t care if the end node is NIC (Network Interface Card) or switch and hub. These ports can operate in half-duplex mode for 10/100Mbps and full- duplex mode for 10/100/1000Mbps.

Note: When the port was set to “Forced Mode”, the Auto MDI/MDIX will be disabled.

10