CSG14 Series Gigabit Converter Switch | Installation and User Guide (05/09) |
The front side of the unit has one twisted-pair 10/100/1000Mb switch port and two 100 or 1000Mb fiber ports. The RJ-45 port of the CSG14U Series Converter switches support auto cross (MDIX) operation performing the autocross function under auto- negotiation mode only. The CSG14U models are factory configured at Full Duplex.
Two sets of LEDs indicating the operating status of ports are mounted on the top and front (for extra viewing advantage while rack-mounted). For each port, there are Link and Activity (LK/ACT) LED’s on the top indicating that the media cables are connected correctly and showing, by blinking, when there is traffic. The LK/ACT LED’s are repeated on the front as LA1 (port 1), LA2 (port 2), and LA3 (port 3). There is a power (PWR) indicator on the front of the unit to validate that the unit is turned ON.
The two fiber ports on the CSG14U are multi-mode or single-mode with a small form-factor connector (LC multi-mode or LC single-mode).
The external DC power plug connector and/or “jack” and the internal DC input terminal is provided on the rear of the unit.
www . GarrettCom . com