GE FPC 1000 manual After software

					Using FPC 1000 with a Notebook PC
Card Problems		Possible Causes		Suggestions
The blue light		Unsuccessful		An ft1000clean.exe utility is provided on
(LED) on the side		driver installation.		the distribution CD under the Tools
of the PC card fails				directory to resolve unsuccessful driver
to illuminate after				installation.
driver installation,				Use the following procedure to resolve the
OR	"Driver			above problems during a full installation:
Installation Error"			1.		Eject the PC card from the system.
message displays
			2.		Uninstall the software package via
after software
					My Computer→Control
installation.
					Panel→Add/Remove
					Programs→Flarion Mobility
					Manager →Change/Remove.
			3.		Run ft1000clean.exe (located on the
					distribution CD under the Tools
					directory).
			4.		Reboot the system as instructed by
					the ft1000clean.exe utility.
			5.		Reinstall the software package
					following the normal installation
					procedure.
				For an upgrade installation:
			1.		Eject the PC card from the system.
			2.		Run ft1000clean.exe (located on the
					distribution CD under the Tools
					directory).
			3.		Reboot the system as instructed by
					the ft10000clean.exe utility.
			4.		Run Upgrade.exe located under the
					'UpgradeCache' directory in the
					Flarion Mobility Manager folder.
			5.		Select "yes" when prompted by
					Upgrade.exe to repair the current
					Flarion Mobility Manager.
			6.		Insert the PC card after completion of
					Upgrade.

 2004 Flarion	Version 1.0
Flarion Proprietary and Confidential	Page 37