Uniden BTS200 manual Battery Features, Install and Charge the Battery, Remove the Battery

Page 18

Battery Features

Your BTS200 comes equipped with a rechargeable Lithium-Ion polymer battery. You can recharge the battery by connecting it to 120 VAC power through the AC adapter.

Install and Charge the Battery

See page 5 for details on installing and charging the battery (the same procedures as for initial turnup).

Remove the Battery

1.Press down on the battery latch to release the battery.

2.With the battery latch pressed down, press down and push out the opposite end of the battery to slide it out of the battery compartment.

Check the Battery Level

Press the battery indicator button while the AC adapter is not connected to your speaker (see page 8). The battery LEDs light according to how much power remains in the battery:

•• 3 LEDs = 100 - 70% remaining

•• 2 LEDs = 70 - 35% remaining

•• 1 LED = 35 - 15% remaining

18 - English

Page 17 Page 19
Image 18
Page 17 Page 19
Contents BTS200 High-Definition Speaker Table of Contents Important Safety Instructions BTS200 HIGH-DEFINITION SpeakerWhat’s Included Charge the Battery SET UP Your BTS200 SpeakerInstall the Battery Turn on Your SpeakerPair Bluetooth Devices to Your Speaker Pair First Bluetooth DeviceBTS200 Top/Front Pair Second Bluetooth DeviceGetting to Know the BTS200 Speaker Icon Press toBTS200 Side Use thisBTS200 Back BTS200 Speaker Operation LEDsIcon Status Meaning Basic Cell Phone Operations GreenCall Waiting Contact your telephone provider for more informationBasic Music Operation Special Features Charge Cellphone using a USB CablePlay Music through a Wired Connection Manage SRS WOW HD On/Off Troubleshooting If this happensReset your BTS200 Speaker Remove the Battery Battery FeaturesInstall and Charge the Battery Check the Battery LevelSpecifications Bluetooth CompatibilityFCC Notice Lithium-Ion polymer battery information Industry Canada statementUniden America Service
Top Page Image Contents