SET UP YOUR BTS200 SPEAKER
Install the Battery
1.Remove the battery from any protective packaging and discard the packaging accordingly.
2.Align the battery pack with the guides along the inside of the battery area. Be sure the contact slots are in the correct position to close on the contacts.
3.Slide the battery in until you hear the latch click.
Charge the Battery
1.Insert the adapter’s DC jack into the DC connection.
2.Plug the adapter into a 120 VAC power supply (standard wall outlet).
3. The middle LED lights to indicate the battery is charging and goes off when complete.
Your battery must be fully charged (more than 7.5 hours) before you can use your speaker.
Turn on Your Speaker
When you turn on your speaker for the first time, it automatically goes into pairing mode.
The Bluetooth LED ( ) flashes rapidly and is ready to pair (see page 6). The next time you turn on your speaker, it searches for already paired devices and then moves into a standby state.
English - 5