Gefen EXT-DVIKVM-441DL user manual Panel Descriptions

Page 8

PANEL DESCRIPTIONS

1External IR Port

For connection of external IR extension device such as the Gefen IR Extender (part # EXT-RMT-EXTIR).

2IR Receiver

Receives IR signal from the handheld Infrared remote control unit included with the 4x1 DVI KVM DL/SL Switcher.

3DVI Signal Status LEDs 1-4

Provide visual confirmation of the currently selected DVI input signal being output to the DVI display device.

4DVI Input Selector

Push-button switch cycles the next DVI input 1-4 in a forward sequence starting again at 1.

5Power Indicator LED

Indicates when the 4x1 DVI KVM DL/SL Switcher is receiving 5V DC power from its included AC power supply.

63.5mm Analog Audio Inputs 1-4

Audio Sources 1-4 connect to the switcher here.

73.5mm Analog Audio Output

This audio output port connects to an external amplified audio device. The selected audio input will be output through this port.

8USB Type B Ports 1-4

USB devices (usually computers) one through four connect to the switcher here.

9USB Type A Control Ports 1-2

The keyboard & mouse for controlling the selected remote computer or device connects to the switcher here.

10RS-232 Serial Communications Interface

Provided for external control of the 4x1 DVI KVM DL/SL Switcher.

115V Locking Power Receptacle

Supplies power to the 4x1 DVI KVM DL/SL Switcher from the included external 5V DC power supply. The 5V power supply has a locking power connector which screws into this receptacle.

12DVI Input Ports 1-4

DVI video sources 1-4 attach to the 4x1 DVI KVM DL/SL Switcher.

13DVI Output Port

This DVI output port is connected to the display device (Monitor, Projector).

5

Page 7 Page 9
Image 8
Page 7 Page 9
Contents 4x1 Dvikvm DL/SL Switcher Asking for Assistance Technical SupportTechnical Support Hours Write ToContents Gefen 4x1 DVI KVM DL/SL Switcher IntroductionGefen How It WorksOperation Notes Package Includes FeaturesFeatures Panel Layout Front Panel Back PanelPanel Descriptions Wiring Diagram for the 4x1 DVI KVM DL/SL Switcher Connecting and Operating the 4X1 DVI KVM DL/SL SwitcherHow to Connect the 4x1 DVI KVM DL/SL Switcher RMT-4IR Remote Control Description LED Indicator Input Selection Buttons4X1 DVI KVM DL/SL Switcher Remote Installation Empty Battery Slot IR Code Dip SwitchesRMT-4IR Remote and 4X1 KVM Switcher Configuration How to Resolve IR Code ConflictsEdid Modes What is Edid and what is it used for?Managing Edid with the 4x1 DVI KVM DL/SL Switcher Local Edid Mode OFF Switch 3 = on Edid Lock Mode DIP Switch 4 = onEdid Modes FunctionDL Dual Link and SL Single Link Mode Switch=OFF Default DL Dual Link Only Mode Switch=ONDL Dual Link only Modes DL Dual Link Only ModesRS-232 Serial Control How do I use these features?What are the RS-232 communications port settings? RS-232 Serial Control Commands RS-232 FeaturesFunctions Syntax Function Description#EDIDBATOLO Function #EDIDDSTOLO Function#EDIDDSTOBA Function #DEF Function #DDCTODS Function#DDCTOLO Function #LOEDIDTOBA Function #LOEDIDTOBA param1 param2 param3#LOEDIDTOLO Function #PRBAEDID Function#PRDSEDID Function #PRLOEDID FunctionCommand Description Input BinaryUsing SHORT-CUT Characters to Change Settings HYPERTERMINALtm Settings in Microsoft WindowstmRack Mount Installation Specifications 5V DCWarranty Product RegistrationPage Page Page Rev A6 Nordhoff St., Chatsworth CA
Top Page Image Contents