How to Operate the 4x1 DVI Switcher, Operation Notes

Connecting and Operating the 4x1 DVI Switcher

How to Connect the 4x1 DVI Switcher to your devices

1Connect the supplied DVI cables from the DVI sources into the DVI Switcher Input.

2Connect the cable from your display (monitor or projector) into the DVI Out of the 4x1 DVI Switcher.

How to Operate the 4x1 DVI Switcher

Use the RMT4-IR remote control port to remotely toggle between sources.

Operation Notes

The 4x1 DVI Switcher may also be powered from the input. The DVI source supplies 5v to the switcher via pin-14 on the DVI cable.

The contact closure port is wired using a shielded CAT5 cable. Pins 1-4 to the shield cause the unit to switch to inputs 1-4. Pins 5-8 are feedback letting you know what has been selected.