Fortinet 127, FORTIGATE Connecting the FortiGate unit to your network, To start the setup wizard

Page 42

Reconnecting to the web-based manager

Transparent mode installation

 

 

Using the setup wizard

From the web-based manager, you can use the setup wizard to begin the initial configuration of the FortiGate unit. For information about connecting to the web-based manager, see “Connecting to the web-based manager” on page 14.

The first time you connect to the FortiGate unit, it is configured to run in NAT/Route mode.

To switch to Transparent mode using the web-based manager

1Go to System > Status.

2Select Change beside the Operation Mode.

3Select Transparent in the Operation Mode list.

4Select OK.

To reconnect to the web-based manager, change the IP address of the management computer to 10.10.10.2. Connect to port 1 and browse to https:// followed by the Transparent mode management IP address. The default FortiGate Transparent mode Management IP address is 10.10.10.1.

To start the setup wizard

1Select Easy Setup Wizard (the middle button in the upper-right corner of the web-based manager).

2Use the information that you gathered in Table 8 on page 38 to fill in the wizard fields. Select the Next button to step through the wizard pages.

3Confirm your configuration settings, and then select Finish and Close.

Reconnecting to the web-based manager

If you changed the IP address of the management interface while you were using the setup wizard, you must reconnect to the web-based manager using the new IP address. Browse to https:// followed by the new IP address of the management interface. Otherwise, you can reconnect to the web-based manager by browsing to https://10.10.10.1. If you connect to the management interface through a router, make sure that you have added a default gateway for that router to the management IP default gateway field.

Connecting the FortiGate unit to your network

After you complete the initial configuration, you can connect the FortiGate-500A unit to your networks.

The FortiGate-500A has five 10/100Base-TX connectors (LAN, 1, 2, 3, and 4) and two 10/100/1000Base-TX connectors (5 and 6) that can be connected to up to seven different network segments. You can connect them in any configuration. If you are configuring HA you can connect the FortiGate-500A to other FortiGate-500A units using port 4.

42

01-28005-0101-20041015

Fortinet Inc.

Image 42
Contents Installation Guide October 01-28005-0101-20041015Trademarks Regulatory ComplianceTable of Contents Index Introduction Reliability demanded by large enterprisesSecure installation, configuration, and management Web-based managerCommand line interface Setup wizardDocument conventions Set allowaccess ping https ssh snmp http telnet Fortinet documentation Comments on Fortinet technical documentationCustomer service and technical support Getting started Package contents MountingEnvironmental specifications Turning the FortiGate unit power on and offPower requirements Air flowConnecting to the web-based manager To power off the FortiGate unitTo connect to the web-based manager Connecting to the command line interface CLI To connect to the CLIFactory default FortiGate configuration settings Bits per second 9600 Data bits ParityStop bits Flow control Account Factory default NAT/Route mode network configurationNetwork Settings PortFactory default Transparent mode network configuration Factory default firewall configurationScan Factory default protection profilesStrict WebPlanning the FortiGate configuration NAT/Route modeNAT/Route mode with multiple external network connections Example NAT/Route mode network configurationTransparent mode Configuration optionsFortiGate-500A Unit Management IP in Transparent mode Web-based manager and setup wizard Next stepsConfiguration options Getting started 01-28005-0101-20041015 NAT/Route mode installation Preparing to configure the FortiGate unit in NAT/Route modeDhcp or PPPoE configuration PPPoE settings User name PasswordTo configure interfaces Go to System Network Interface Using the web-based managerConfiguring basic settings To configure DNS server settings Go to System Network DNSGo to System Router Static Using the front control buttons and LCDTo add a default route To change the IP address and netmask of an interfaceTo add a default gateway to an interface Using the command line interfaceConfiguring the FortiGate unit to operate in NAT/Route mode To add/change the administrator passwordExample To configure DNS server settings Using the setup wizard Starting the setup wizard Setup wizard settings AntivirusConnecting the FortiGate unit to the networks To connect the FortiGate unit running in NAT/Route modePort 1 Port Configuring the networks Go to System Config TimeTo set the date and time To configure virus, attack, and spam definition updates Go to System Maintenance Update CenterTo register the FortiGate unit Transparent mode installation Preparing to configure Transparent modeTransparent mode settings Administrator Password DNS SettingsTo change the Management IP Go to System Network Management Reconnecting to the web-based manager To add a default gatewayTo change the management IP address and netmask To change to Transparent mode using the CLI To configure the management IP addressTo configure the default gateway ExampleConnecting the FortiGate unit to your network To start the setup wizardFortiGate-500A PortTo register your FortiGate unit High availability configuration settings High availability installationConfiguring FortiGate units for HA operation Priorities of heartbeat device and monitor prioritiesGroup ID MAC Address To change the FortiGate unit host name Configuring FortiGate units for HA using the CLI Config system global Set hostname namestr endConnecting the cluster to your networks To configure the FortiGate unit for HA operationHA network configuration To connect the clusterInstalling and configuring the cluster Configuring FortiGate units for HA using the CLI Index CLIIndex 01-28005-0101-20041015

500A, Network Router, 127, FORTIGATE specifications

Fortinet FortiGate 127 is an advanced network security appliance designed to deliver comprehensive protection to organizations while ensuring seamless network performance. As a part of Fortinet's leading next-generation firewall (NGFW) offerings, the FortiGate 127 integrates various essential features and technologies that are critical for modern network security.

One of the standout features of the FortiGate 127 is its ability to perform deep packet inspection. This technology enables the device to analyze and filter network traffic, identifying and mitigating threats such as malware, viruses, and intrusions in real-time. With a robust Threat Intelligence system, FortiGate utilizes FortiGuard Labs to provide continuous updates on emerging threats, equipping organizations with the necessary defense against sophisticated cyberattacks.

Another key technology included in the FortiGate 127 is integrated secure SD-WAN functionality. This feature allows organizations to optimize their wide-area network (WAN) connections, enhancing performance and reducing costs through intelligent traffic routing and real-time application visibility. By leveraging software-defined capabilities, businesses can ensure efficient use of their bandwidth, prioritize critical applications, and maintain high levels of uptime.

The FortiGate 127 also excels in providing advanced VPN support. With multiple VPN protocols such as IPsec and SSL, users can establish secure remote connections, facilitating safe access to corporate resources from anywhere. This is particularly important in today's remote work environment, where secure connectivity is essential for maintaining productivity while protecting sensitive data.

In terms of performance, the FortiGate 127 is equipped with high throughput capabilities, ensuring it can handle extensive network traffic without compromising speed or efficiency. Its multi-core architecture allows for parallel processing, which enhances overall performance and responsiveness.

Additionally, the device features an intuitive and user-friendly interface, enabling IT teams to easily manage and configure network policies. With centralized management options, administrators can efficiently oversee multiple FortiGate devices within their network, ensuring optimal visibility and control.

Overall, the Fortinet FortiGate 127 Network Router is a powerful solution for organizations seeking to bolster their security posture. With its combination of deep packet inspection, integrated SD-WAN functionality, advanced VPN support, and high-performance capabilities, it stands out as a vital asset in the modern cybersecurity landscape. It is an ideal choice for businesses aiming to protect their networks from the ever-evolving threat landscape while maintaining operational efficiency.