Rear Panel Layout

MOON W5.3 Stereo Power Amplifier

Figure 1: Rear panel of Moon W5.3 Stereo Amplifier

The rear panel will look similar to Figure 1 (above). Each channel has one balanced (differential) input on an XLR connector and one unbalanced (single-ended) input on a RCA connector. There is no switch to toggle from balanced mode to single- ended mode. You may operate the amplifier in either mode, but only one mode at one time for each channel. In the event that you’re using the balanced XLR inputs, you must first remove the factory installed “dummy” XLR jumpers (see figure 2 below) from the back panel XLR connectors and store them in a safe place. These jumpers are required ONLY when using the single-ended RCA inputs. In the event that you decide to switch to single-ended input mode, you must reinstall the XLR jumpers (between pins 1 and 3) exactly as show below:

Figure 2: XLR connector without and with jumper accessory

Two pairs of heavy duty gold-plated speaker binding posts are also located on opposite sides of the rear panel; one pair (“-” and “+”) for each for the left and right speaker.

On the far right side, you will find (from top to bottom); The power “main switch”; The “AC Fuse” socket cover; the “AC in” IEC receptacle for the power cord and the 12 Volt trigger input.

____________________________________________________________________________________

Rear Panel

W5.3 specifications

The Simaudio W5.3 is a high-performance stereo power amplifier designed for audiophiles seeking superior sound quality and robust build quality. Known for its exceptional clarity and precision, the W5.3 is part of Simaudio's Moon series, which is celebrated for its innovative engineering and attention to detail.

One of the standout features of the W5.3 is its solid-state design, which utilizes a Class A/B amplification topology. This design provides the power and dynamic range necessary for driving various speakers effectively while maintaining low distortion levels. With an output of 120 watts per channel into 8 ohms and 200 watts into 4 ohms, the W5.3 can handle a wide variety of speaker loads, making it versatile for different audio setups.

The W5.3 incorporates Simaudio’s proprietary technology called the MOON Evolution power supply, which consists of a toroidal transformer and multiple filtration stages. This ensures a clean and stable power supply, minimizing noise and interference, thereby contributing to the amplifier's impressive sonic performance. The build quality is exceptional, featuring a robust aluminum chassis that not only looks elegant but also helps reduce resonance and mechanical vibrations, further enhancing audio fidelity.

For connectivity, the W5.3 includes both balanced (XLR) and unbalanced (RCA) inputs, allowing for flexibility in system configuration. It also features high-quality speaker terminals that can accommodate a variety of connector types, ensuring a solid and reliable connection under various circumstances.

In terms of user functionality, the W5.3 benefits from a unique circuit design that allows for minimal signal degradation and a wide frequency response, resulting in a natural and accurate sound reproduction. This is essential for audiophiles who desire an amplifier that can reveal the subtleties and nuances of their favorite recordings.

Moreover, the W5.3 is equipped with advanced protection circuitry to safeguard both the amplifier and connected components. This feature ensures longevity and peace of mind for users, as it prevents damage due to overheating, short circuits, or overloading.

Overall, the Simaudio W5.3 is a remarkable power amplifier that combines innovative technology, high-quality materials, and superior performance. It exemplifies what audiophiles seek: a robust and reliable amplifier that delivers an immersive and captivating listening experience. Whether used in a home theater or a dedicated audio system, the W5.3 is a compelling choice for those who demand the best from their sound equipment.