Eizo CG211 manual Adjustment Procedure, Push the Auto Adjustment Button on the control panel

Page 35

The monitor displays the digital input image correctly based on its pre-setting data.

Analog Input

Screen adjustments for the LCD monitor should be used in suppressing screen flickering and also for adjusting the screen to its proper position. There is only one correct position for each display mode. It is also recommended to use the ScreenManager function when first installing the monitor or whenever changing the system. For convenience, an easy set-up program installed on the utility disk to assist in the set-up procedure is provided.

*Allow the LCD monitor to stabilize for at least 30 minutes before making image adjustments. (Allow the monitor to warm Up for at least 30 minutes before making adjustments.)

Adjustment Procedure

1.Push the Auto Adjustment Button on the control panel.

The message "Your setting will be lost if you press again now." appears and remains on the screen for 5 seconds. While the message is on the screen, press the Auto Adjustment button again to automatically adjust the clock, phase, screen position and resolution. If you do not wish to do adjust the screen, do not press the Auto Adjustment button again.

*The Auto sizing function is intended for use on the Macintosh and on AT- compatible PC running Windows. It may not work properly in either of the following cases.

When running an AT-compatible PC on MS-DOS (Not windows). The background color for the "wall paper" or "desktop" pattern is set to black. It cannot work correctly using with some graphics cards.

If the appropriate screen cannot be made by using the Auto Adjustment button, adjust the screen through the following procedures. If the appropriate screen can be made, proceed to step 4.

Image 35

Contents Microsoft Internet Exproler Safety Symbols PrecautionsPage Page Page Do not open the cabinet or modify the unit Location of the Caution StatementsSet the unit in an appropriate location Refer all servicing to qualified service personnelKeep small objects or liquids away from the unit Place the unit at the strong and stable placeUse the correct voltage Handle the power cord with careNever touch the plug and power cord if it begins to thunder Equipment must be connected to a grounded main outletFollow local regulation or laws for safe disposal Handle with care when carrying the unitDo not touch a damaged LCD panel directly with bare hands Do not block the ventilation slots on the cabinet Use an easily accessible power outletPeriodically clean the area around the plug Unplug the unit before cleaning itPage Page Hood FrontRear Page Analog Input Digital Input Plug the other end of the power cord into a power outlet To input the Signal through ADC Page Monitors power indicator will flash yellow slowly Switch on the PCs power Page Selecting the Active Input Priority Input SignalAttach the hood to the monitor Setup ProcedureSlide the top hood to close Setup Procedure Attach an arm stand to the LCD monitor securely Entering the ScreenManager Making Adjustments and SettingsMain menu Sub menu Reference Exiting the ScreenManagerDVI Dmpm Exit To select the ModeFineContrast Mode Detailed Adjustments Color Adjustment of the Mode Settings Adjustment Lock To unlock Off TimerEizo Logo Appearing Function Power Indicator settingPush the Auto Adjustment Button on the control panel Adjustment ProcedureAdjust by using Screen menu in the ScreenManager Run the Screen Adjustment ProgramScreen position is incorrect = Use the Position adjustment Procedure Menu Function Adjustment Items Adjustment Contents Gamma To use the PCs Power Saving System Vesa Dpms This monitor complies with the DVI Dmpm Turn the panel 90 degrees Operating ProceduresPage Required System Environment Connecting to the HUB USBConnecting Examples Try pressing a key on the keyboard, or clicking the mouse No pictureDisplay position is incorrect Horizontal bars of distortion appear Page Page LCD Panel Cabinet54 cm 21.3 inch, TFT color LCD panel with Anti-Glare Hard Vesa Dpms DVI Dmpm Default settingsDimensions Beeper settingsPin Assignment DVI-I ConnectorClock Color Temperature TemperatureAfterimage Gamma DVI Dmpm DVI Digital Monitor Power ManagementGain Adjustment DVI Digital Visual InterfaceTmds Transition Minimized Differential Signaling PhaseRange Adjustment ResolutionVesa Dpms VGA Text Analog input Analog Eingang Analog numeriqueDigital Input Digitaler Eingang Entrée numérique VGA Emissions CongratulationsErgonomics EnergyPage Page Informations sur le recyclage pour les clients dans lUE Hinweis zur ErgonomieRecycling Information for customers in EU Recycling-Information für Kunden in EuropaRecycling Information for customers in USA Återvinningsinformation för kunder i EU