7.Horizontal bars of distortion appear.
8.Letters and lines appear blurred.
9.Distortion appears like the figure below.
10.The screen is too bright or too dark.
11. Afterimages appear.
12.The screen has defective pixels (e.g. slightly light or dark).
13.Fingerprints remain on the screen.
14.The noise appears on the screen.
[ ] Decrease the horizontal bars using the <Phase>.
[ ] Adjust the blurred lines using <Smoothing>.
[ ] This happends when both composite
[ ] Adjust the <Brightness> (The backlight of the LCD monitor has a fixed life span. When the screen becomes dark or begins to flicker, please consult your dealer.)
[ ] When the screen image is changed after displaying the same image for a long period, an afterimage may appear. The "Afterimage" can be removed gradually by changing the displayed image. Use the <Off Timer> function and avoid keeping the screen on all the time.
[ ] This is due to the characteristics of the panel itself, and not the LCD product.
[ ] Leaving the screen white may solve the problem.
[ ] Change the mode in <Signal Filter> in the <Screen> menu.