Farallon Communications PB 1400 appendix Reinserting the RAM card

Page 6

6 Chapter 1

13.Place the RAM card beneath the PB 1400 Ethernet Card. (See the illustration below.) If necessary, you can gently raise the PB 1400 Ethernet Card and move it to the left to make room for the RAM card (do not bend the PB 1400 Ethernet Card). Align the RAM card over the RAM card slot, and press down firmly until the card’s connector is fully seated in the slot.

Reinserting the RAM card

14.Align the PB 1400 Ethernet Card over the expansion slot, and press down firmly until the card’s connector is fully seated in the slot. Do not force; if you meet resistance, pull the card out and try again.

Image 6

Contents PB 1400 Ethernet Card User’s Guide Copyright notice Part NumberChapter Installation Installing the hardware Inserting the PB 1400 Ethernet Card Reinserting the RAM card Attaching the metal bracket Connecting to the network 10Base-TInstalling the software Running the installerChapter Configuring the networking software Connecting to network services Chapter Operation Operation checklist Using the PB 1400 EN Diagnostics control panel Chapter Operation Network Guidelines Guidelines for traditional 10Base-TPower Consumption Appendix a Technical SpecificationsEnvironmental characteristics System requirementsPorts, cables, and connectors Regulatory notice-United States Regulatory notice-CanadaRegulatory notice-European Community How to reach us Farallon Technical SupportFarallon Internet information resources Farallon BBSFarallon FAX-Back Outside of the United States and CanadaExpanding your network with Farallon Technical Support Warranty Limited Warranty and Limitation of Remedies397