Ergotron CRT Monitor Wall Bracket, Desk Mounts, Part Description Dimensions Arm Fasteners Number

Mounting Systems

Wall Bracket

Caution: Surface construction varies and the ultimate mounting method you use to attach an Ergotron mounting system is out of Ergotron’s control. It is important to consult with the appropriate local engineering, architectural, or construction personnel to ensure that an Ergotron mounting system is mounted properly to handle applied loads.

The Wall Bracket allows mounting of any monitor arm directly to a wall or solid structure, like a machine or pillar. This economical solution adds the extra support you need.

Part	Description	Dimensions	Arm Fasteners
Number		W x H
60-152-000	Wall Mounting Bracket	6-5/8" x 8"	(6) 3/8"-16 x 3/4"
	with arm fasteners	(168 x 203 mm)	carriage bolt

Note: Fasteners that attach Wall Bracket to wall are not supplied by Ergotron.

Wall Bracket

Fasteners that attach

bracket to wall notExtender Arm included

Desk Mounts

Desk Mounts allow direct attachment of a monitor arm to a horizontal surface, like a tabletop or desk.

They are compatible only with the 10" Lift Arm.

Desk Clamp Grommet Mount

Part	Description	Attaches to…
Number
60-257-100	Desk Clamp	Horizontal surface at edge ≤ 3" (76 mm) thick
33-269-000	Grommet Mount	Horizontal surface through hole 3/8" to 3"
		(10 to 76 mm) wide, up to 4" (102 mm) thick
		Keyboard Holder

10" Lift Arm

Desk Clamp

Desk Mount configuration example

870-03-018 rev. 05/13/04 • CRT Monitor Mounting Solutions Orderguide • 17