Enterasys Networks E9.1.7.0 XP-2-SER-AA, XP-2-SERC-AA, XP-2-SERCE-AA, XP-2-SX-AA, XP-2-TX-AA

HARDWARE / FIRMWARE COMPATIBILITY

				Minimum	Minimum
Part		Description		System	Boot
				Firmware	Firmware
				Version	Version
XP-2-LX70-AA		1-port 70 km 1000BASE-LX module for X-Pedition 2400	E9.0.0.0
XP-2-SER-AA		2-port Serial module (No compression or encryption) for X-Pedition 2400	E9.0.0.0
XP-2-SERC-AA		4-port Serial module with compression (No encryption) for X-Pedition 2400	E9.0.0.0
XP-2-SERCE-AA		4-port Serial module with compression and encryption for X-Pedition 2400	E9.0.0.0
XP-2-SX-AA	2-port 1000BASE-SX module for X-Pedition 2400		E9.0.0.0
XP-2-TX-AA		8-port 10/100 TX module for X-Pedition 2400		E9.0.0.0
XP-PCMCIA-16AT		16MB ATA PCMCIA card for SSR-CM2-64, SSR-CM2-128, SSR-CM3-128, SSR-		E8.2.0.0	E3.1.0.0
		CM4-256, ER16-CM3-128, and ER16-CM4-256
XP-PCMCIA-32AT		32MB ATA PCMCIA card for SSR-CM2-64, SSR-CM2-128, SSR-CM3-128, SSR-		E8.2.0.0	E3.1.0.0
		CM4-256, ER16-CM3-128, and ER16-CM4-256
XP-PCMCIA-16LN	16MB PCMCIA card for SSR-CM2-64, SSR-CM2-128, SSR-CM3-128, SSR-CM4-		3.0.1.6,		E3.0.0.0
		256, ER16-CM3-128, and ER16-CM4-256	3.0.1.7,
			3.1.0.8
				and up,
				excluding
			3.2.0.0

The following table lists hardware not supported in this System Firmware release. The last System Firmware release to support this hardware was series 3.0.X.X.

Part	Description
SSR-2-B	SSR2000 with 32 MB
SSR-2-B-AA	SSR2000 with 32 MB
SSR-CM-128	Control Module 1 with 128 MB memory for SSR8000 and SSR8600
SSR-CM-64	Control Module 1 with 64 MB memory for SSR8000 and SSR8600

10/02/03 P/N: 9038090-53 Subject to Change Without Notice Page: 9 of 31

F0615-J