CHAPTER 1
INTRODUCTION
Welcome to the Cabletron Systems BRIM-E6 User’s Guide. This manual explains how to install the Bridge/Router Interface Module (BRIM) for Ethernet into Cabletron products that support BRIM technology (e.g., the EMM-E6 or MicroMMAC). It also explains BRIM-E6 features and specifications.
1.1USING THIS MANUAL
Read through this manual completely to familiarize yourself with its content and to gain an understanding of the features and capabilities of the BRIM-E6. A general working knowledge of Ethernet, and IEEE 802.3 type data communications networks and their physical layer components is helpful when using the BRIM-E6.
Chapter 1, Introduction, describes BRIM-E6 features, lists specifications, and concludes with a list of related manuals.
Chapter 2, Installation, describes how to install the BRIM-E6 into a Media Interface Module (MIM) or a stand-alone product. This chapter also explains how to install an Ethernet Port Interface Module (EPIM) into the BRIM.
Chapter 3, Connecting to the Network, explains how to connect network segments to the EPIM.
Chapter 4, Using the LANVIEW LEDS, describes how to use the BRIM-E6 LEDs to monitor BRIM performance and status.
Appendix A, EPIM Specifications, lists specifications for each of the EPIMs available for the BRIM-E6.
Appendix B, EPIM Cable Requirements lists cable requirements for each of the EPIMs.