Rear Panel Connections, Moon 310LP Rear panel

MOON 310LP Phono Preamplifier

Rear Panel Connections

Figure 11: MOON 310LP Rear panel

The rear panel will look similar to Figure 11 (above). There is one pair of single-ended inputs on RCA connectors located in the center with a ground post directly below. Connect the cables from your turntable to these inputs and the ground lead wire to the ground post. The MOON 310LP Phono Preamplifier has two pairs of outputs; One single-ended pair on RCA connectors and one balanced pair on XLR connectors.

In the event that the preamplifier/integrated amplifier you’re connecting the 310LP to has balanced inputs, its highly advantageous to use the 310LP’s XLR outputs. This will provide you with an even better signal-to-noise ratio and increased gain by a factor of 6dB.

Don’t hesitate to use high quality interconnects. Poor quality cables can degrade the overall sonic performance of your system.

Finally on the right side the IEC receptacle, labeled “AC Power” for the included AC power cord. Directly above the IEC receptacle is a 4-pin XLR connector labeled “DC Power”; this is for the optional 310LP external power supply upgrade.

All rear panel connectors have been chosen because they provide the best possible connections for your unit. A poor contact will degrade the signal substantially, and plugs and sockets should all look clean and free of dirt and corrosion. The easiest way to clean them is to remove the cables from their sockets and push them back in again. This procedure requires that your Phono Preamplifier and the rest of your components be completely turned off. Not heeding this warning may result in serious damage to your equipment. Special contact cleaning fluids and enhancers should not be used, as they deposit a difficult to remove residue which can degrade the performance of your components over the long term.

____________________________________________________________________________________

Rear Panel Connections

310 LP specifications

The Simaudio 310 LP is a high-performance phono stage designed to cater to discerning audiophiles seeking exceptional sound quality and versatility. This state-of-the-art device offers a range of features and technologies that elevate the listening experience, making it a standout component in any vinyl setup.

One of the main characteristics of the 310 LP is its ability to support both moving magnet (MM) and moving coil (MC) cartridges. This dual compatibility allows users to enjoy the fine nuances of their vinyl collection, regardless of the cartridge type. It features customizable loading options for MC cartridges, with adjustable resistive loading settings to fine-tune the performance according to the specific characteristics of the cartridge.

The device boasts an impressive signal-to-noise ratio, ensuring that even the quietest passages are rendered with stunning clarity. The use of high-quality components includes precision resistors and capacitors that are meticulously selected for their audio fidelity, allowing the 310 LP to deliver a rich, detailed soundstage. The phono preamp also features a low-distortion circuit design that minimizes signal degradation, preserving the original quality of the vinyl playback.

Another notable aspect of the Simaudio 310 LP is its innovative power supply design. It employs a high-performance linear power supply to further reduce noise and improve dynamic range. This thoughtful engineering enhances the overall stability and performance of the device, contributing to a lifelike and immersive listening experience.

The 310 LP is user-friendly, featuring an intuitive front-panel design that allows for easy operation. It includes LED indicators for power and input selection, which provide convenience without compromising the aesthetic appeal of the unit. Additionally, the phono stage incorporates both balanced and unbalanced outputs, ensuring compatibility with a wide range of audio systems.

In summary, the Simaudio 310 LP stands out as a premium phono stage that combines flexibility, outstanding sound quality, and cutting-edge technology. Its versatile features make it an ideal choice for audiophiles who demand the best from their vinyl playback systems, solidifying its place in the high-end audio market. Whether you are a vinyl enthusiast or a seasoned collector, the 310 LP promises to enhance your listening experience and bring your favorite records to life with unparalleled fidelity.