Internal Settings, Resistance Loading

MOON 310LP Phono Preamplifier

Internal Settings

There are four (4) types of input settings available on the MOON 310LP Phono Preamplifier; Capacitance loading, Resistance loading, Equalization curve and Gain level. Each setting is adjustable through the use of jumpers. For each type of setting, there are 2 banks of jumpers – one each for the left and right channels. This is the result of the 310LP’s genuine mirror- image circuit design which yields exceptional stereo separation.

Always place the preamplifier that your 310LP is connected to, either into mute or stand-by mode prior to changing any of the following input settings. Then disconnect the AC power cord from the rear of the 310LP.

There are a total of eight (8) screws that you must remove using the included allen-key four each on either side of the chassis. Once these screws are removed, carefully lift off the chassis cover. Once the cover is removed, you are ready to make all of the necessary internal adjustments to the 310LP to achieve optimal sonic performance.

Resistance Loading:

There are five (5) different settings available for setting the resistive load; 10Ω, 100Ω, 470Ω, 1kΩ and 47kΩ which are represented by jumper sockets J9, J10, J11, J12 and J13 respectively for the left channel and jumper sockets J27, J28, J29, J30 and J31 for the right channel (refer figure 2 below). The factory default setting is 47kΩ, therefore jumpers will be found in sockets J13 & J31.

Figure 2: Left and right channel jumper banks for resistance load adjustments at default setting

In the event that you’re using a moving magnet (MM) cartridge, it is recommended that you leave the jumpers inserted in sockets J13 & J31 (the factory default) for a 47kΩ resistive load. Conversely, if you’re using a moving coil (MC) cartridge, experiment with the four (4) other available loads ranging from 10Ω through 1KΩ, selecting the load that provides the best possible sound quality. For example, if you decided on using the resistance setting of 100Ω, then you would insert the supplied jumpers into sockets J10 and J28 (see figure 3 below).

Figure 3: Left and right channels set to a 100Ω resistance load

One of the five jumper sockets for each channel must always have a jumper inserted into it, otherwise the 310LP will not produce an output signal. As well, you should always maintain the same resistance setting for both channels, otherwise sound will vary between the left and right channels of your audio system.

____________________________________________________________________________________

Internal Settings

310 LP specifications

The Simaudio 310 LP is a high-performance phono stage designed to cater to discerning audiophiles seeking exceptional sound quality and versatility. This state-of-the-art device offers a range of features and technologies that elevate the listening experience, making it a standout component in any vinyl setup.

One of the main characteristics of the 310 LP is its ability to support both moving magnet (MM) and moving coil (MC) cartridges. This dual compatibility allows users to enjoy the fine nuances of their vinyl collection, regardless of the cartridge type. It features customizable loading options for MC cartridges, with adjustable resistive loading settings to fine-tune the performance according to the specific characteristics of the cartridge.

The device boasts an impressive signal-to-noise ratio, ensuring that even the quietest passages are rendered with stunning clarity. The use of high-quality components includes precision resistors and capacitors that are meticulously selected for their audio fidelity, allowing the 310 LP to deliver a rich, detailed soundstage. The phono preamp also features a low-distortion circuit design that minimizes signal degradation, preserving the original quality of the vinyl playback.

Another notable aspect of the Simaudio 310 LP is its innovative power supply design. It employs a high-performance linear power supply to further reduce noise and improve dynamic range. This thoughtful engineering enhances the overall stability and performance of the device, contributing to a lifelike and immersive listening experience.

The 310 LP is user-friendly, featuring an intuitive front-panel design that allows for easy operation. It includes LED indicators for power and input selection, which provide convenience without compromising the aesthetic appeal of the unit. Additionally, the phono stage incorporates both balanced and unbalanced outputs, ensuring compatibility with a wide range of audio systems.

In summary, the Simaudio 310 LP stands out as a premium phono stage that combines flexibility, outstanding sound quality, and cutting-edge technology. Its versatile features make it an ideal choice for audiophiles who demand the best from their vinyl playback systems, solidifying its place in the high-end audio market. Whether you are a vinyl enthusiast or a seasoned collector, the 310 LP promises to enhance your listening experience and bring your favorite records to life with unparalleled fidelity.