Enterasys Networks 24-Port manual Hardware Specifications, Certifications, Model BL-69524ENT

Page 23

A

Hardware Specifications

Certifications

The equipment meets the following safety standards and emissions requirements:

Safety	UL 1950 and cUL

Emissions	FCC Class A EN 55022, Class A EN 55024,
	CE Mark (CISPR 22 Class A) CB certified per IEC 60950

Standards	P802.3af

Model BL-69524ENT

•24 female RJ45 data input ports

•Shielded jacks for Category 5 or greater UTP (two pair wire) or 100-ohm STP (two pair wire)

•Distance: Up to 100 meters, standard Ethernet distance

•24 female RJ45 Data+Power on Ethernet (Power over Ethernet) output ports

Mid-Span Power Hub 24-Port User’s Guide A-1

Image 23

Contents Mid-Span Power Hub Port User’s Guide Page FCC Notice Industry Canada Notice Enterasys NETWORKS, INC Firmware License Agreement Page Page Declaration of Conformity Contents Viii Document Conventions About This GuidePurpose Who Should Use This guideGetting Help Introduction Functions and FeaturesPort Indicators Page Verifying the Kit Installation and ConnectionKit Contents Technical Considerations Typical Configuration for a 24-Port Mid-Span Power Hub Configuration for the 24-Port Mid-Span Power HubModule Bank for the 24-Port Mid-Span Power Hub Powering UpPage Troubleshooting Checklist Problem Recommended Action TroubleshootingProbably a faulty data link in the load Model BL-69524ENT Hardware SpecificationsCertifications Physical/Mechanical Specifications Electrical Specifications