DigiPower ePowerSwitch user manual

Page 29

10.After rebooting the system, the new settings will be activated. Reboot (y/n)? Hit the y key then hit enter.

11.The iSwitch has rebooted to activate the new settings. Click OK. Arrow down to exit then hit enter.

12.At the MS-DOS Prompt type exit, then hit enter.

13.The Telnet Configuration is complete. The iSwitch is fully operational. After about thirty seconds the Link LED will start blinking, now you can communicate with the iSwitch. The Ping command is supported at this time. Startup a Browser and type in the IP Address. The default password is admin (lower case). Go to the section in the User’s Manual titled “Web-Based Configuration” it will guide you through the Web pages.

14.All functions description please refer to Page 30.

29

Page 28 Page 30
Image 29
Page 28 Page 30
Contents EPowerSwitch Table of Contents Trademarks Quick Install Procedure ISwitch-Front Panel ISwitch-Rear Panel Introduction ISwitch FeaturesSetup via the USB Port Requires Windows 98 or higher Setup ProcedurePage Page Page Page Page Page Page Page Setup via the Serial Port Page Page Page Page Page Setup via the Ethernet Port Page Telnet Configuration Page Page Page Page Web-Based Configuration Page ISP Mode PPP Mode Page Page ISwitch Name ID Address Configuration and IdentificationPage Page Page Firmware Upgrade Procedures Page Page Page Firmware upgrade is complete Telephone Access Interface Daisy Chaining Page Solution ProblemValue Purpose Subnet masking AppendixSubnet Mask Routing and Filtering Subnetting and Subnet MasksDry Closure AgentInput Dry Closure OutputObtaining Technical Assistance

ePowerSwitch specifications

DigiPower ePowerSwitch is an innovative solution designed to provide users with comprehensive control over their power management systems. Its advanced features and technology make it a leading choice for those seeking to enhance their energy efficiency and simplify their power management processes.

One of the main features of the ePowerSwitch is its ability to remotely manage power outlets via a user-friendly web interface or mobile application. This functionality allows users to turn devices on or off, schedule operations, and monitor energy consumption from anywhere, ensuring greater flexibility and control. The ability to manage power remotely not only increases convenience but also helps in reducing energy costs by allowing for better management of the devices.

The ePowerSwitch uses intelligent power monitoring technology that provides real-time energy consumption data. This enables users to track energy usage patterns, identify energy hogs, and optimize their systems for improved efficiency. Additionally, users have access to historical data and trends, allowing for informed decision-making regarding energy management.

Another impressive characteristic of the DigiPower ePowerSwitch is its robust security features. It employs advanced encryption protocols to ensure secure communication over the network, minimizing the risk of unauthorized access and enhancing the protection of connected devices. Users can also set access controls to determine who can manage the ePowerSwitch, adding another layer of security.

Compatibility is yet another important aspect of the ePowerSwitch. It supports a wide array of devices and integrates seamlessly with existing power management systems in homes, offices, and industrial setups. This versatility makes it an ideal solution for diverse applications, from residential energy management to professional IT environments.

In addition to these features, the ePowerSwitch is designed with sustainability in mind. Its energy-saving capabilities help organizations reduce their carbon footprint by promoting the efficient use of power. This aligns with the growing emphasis on eco-friendly practices in both businesses and homes.

Overall, DigiPower ePowerSwitch stands out as a reliable, efficient, and user-friendly solution for power management. With its impressive array of features, intelligent technologies, and commitment to security, it serves as an essential tool for users seeking to enhance their energy management strategies and improve overall efficiency. The DigiPower ePowerSwitch is certainly a forward-thinking solution for the modern energy-conscious consumer.
Top Page Image Contents