DigiPower ePowerSwitch user manual Introduction, ISwitch Features

Page 7

Introduction

The Remote Power Manager (iSwitch) is a network-manageable, intelligent power control unit designed to provide control of power for up to eight electrical devices.

NOTE: If the iSwitch is turned off by the master power switch, you have to wait approximately thirty seconds before restarting the iSwitch to allow the iSwitch to internally reset.

iSwitch Features

Internet ready — Individually control each of the eight AC receptacles by using a Web Browser. Remotely and individually reboot locked up servers.

If the network locks up, you can use the telephone to control the iSwitch to shutdown or to reboot locked up devices or servers.

Sequentially apply power to the equipment that is plugged into the iSwitch. Multiple OS support—As long as there is Network Management software present.

Remote setup support— Once an IP address is assigned, the rest can be setup remotely through telnet commands.

USB port setup—In addition to the regular serial port setup, this adapter also has a USB setup feature for initial setup of this card. (Requires Windows 98 or higher)

Remote Control—Turns each of the AC receptacles on/off when the NMS sends the proper command. Remote Firmware upgrade support - The Remote Power Manager supports firmware upgrade through TFTP server remotely. A serial upgrade method is available too.

iSwitch Package

The standard iSwitch package contains a Remote Power Manager Unit with supporting hardware and software. The components of your package are:

1.Remote Power Manager Unit

2.Rack mount Brackets

3.AC Power Cord

4.USB Cable

5.DB9 Female-to-Female Serial Cable

6.RJ-11 to RS232 NT Server Cable

7.RJ-11 Cascade Cable (RS485)

8.3.5“ Diskette (includes USB device driver, USB setup software, and the User’s Manual)

Figure 1- ePowerSwitch Unit

7

Image 7
Contents EPowerSwitch Table of Contents Trademarks Quick Install Procedure ISwitch-Front Panel ISwitch-Rear Panel Introduction ISwitch FeaturesSetup via the USB Port Requires Windows 98 or higher Setup ProcedurePage Page Page Page Page Page Page Page Setup via the Serial Port Page Page Page Page Page Setup via the Ethernet Port Page Telnet Configuration Page Page Page Page Web-Based Configuration Page ISP Mode PPP Mode Page Page ISwitch Name ID Address Configuration and IdentificationPage Page Page Firmware Upgrade Procedures Page Page Page Firmware upgrade is complete Telephone Access Interface Daisy Chaining Page Solution ProblemValue Purpose Subnet masking AppendixSubnet Mask Routing and Filtering Subnetting and Subnet MasksOutput AgentDry Closure Input Dry ClosureObtaining Technical Assistance

ePowerSwitch specifications

DigiPower ePowerSwitch is an innovative solution designed to provide users with comprehensive control over their power management systems. Its advanced features and technology make it a leading choice for those seeking to enhance their energy efficiency and simplify their power management processes.

One of the main features of the ePowerSwitch is its ability to remotely manage power outlets via a user-friendly web interface or mobile application. This functionality allows users to turn devices on or off, schedule operations, and monitor energy consumption from anywhere, ensuring greater flexibility and control. The ability to manage power remotely not only increases convenience but also helps in reducing energy costs by allowing for better management of the devices.

The ePowerSwitch uses intelligent power monitoring technology that provides real-time energy consumption data. This enables users to track energy usage patterns, identify energy hogs, and optimize their systems for improved efficiency. Additionally, users have access to historical data and trends, allowing for informed decision-making regarding energy management.

Another impressive characteristic of the DigiPower ePowerSwitch is its robust security features. It employs advanced encryption protocols to ensure secure communication over the network, minimizing the risk of unauthorized access and enhancing the protection of connected devices. Users can also set access controls to determine who can manage the ePowerSwitch, adding another layer of security.

Compatibility is yet another important aspect of the ePowerSwitch. It supports a wide array of devices and integrates seamlessly with existing power management systems in homes, offices, and industrial setups. This versatility makes it an ideal solution for diverse applications, from residential energy management to professional IT environments.

In addition to these features, the ePowerSwitch is designed with sustainability in mind. Its energy-saving capabilities help organizations reduce their carbon footprint by promoting the efficient use of power. This aligns with the growing emphasis on eco-friendly practices in both businesses and homes.

Overall, DigiPower ePowerSwitch stands out as a reliable, efficient, and user-friendly solution for power management. With its impressive array of features, intelligent technologies, and commitment to security, it serves as an essential tool for users seeking to enhance their energy management strategies and improve overall efficiency. The DigiPower ePowerSwitch is certainly a forward-thinking solution for the modern energy-conscious consumer.