Contents |
| |
1. | Introduction | 13 |
2. | Safety Advice | 13 |
3. | Faults and Damage | |
4. | Safety Regulations | 14 |
5. | ||
6. | Technical Data | |
7. | Use and Application / Operating Instructions | |
8. | Repairs | 18 |
9. | Cleaning, Maintenance and Storage | 18 |
10. Guarantee and Liability | 19 | |
11. Declaration of EC Conformity | 20 | |
12. EC | ||
13. Certificate of Compliance | ||
12 |
| |
1. Introduction
The
2. Safety Advice
These Operating Instructions contain information and safety regula- tions which must be followed to ensure safe and reliable operation of the unit under the described conditions.
Failure to follow the information and instructions contained in these Operating Instructions can have dangerous consequences or may vio- late applicable rules and regulations.
Please take the time to carefully read through these Operating Instructions before you start using the unit.
In the event of any doubt or discrepancies (e.g. due to errors in trans- lation and/or printing), the original German language version of the Operating Instructions should be referred to.
3. Faults and Damage
If there is any reason to suspect that the safety or integrity of the unit has been compromised, then it must be taken out of operation imme- diately and removed from the
Precautionary measures must be taken in order to prevent any further use of the unit in the
The safety and integrity of the unit may be compromised by, for example:
-External damage is evident on the housing.
-The unit has been subjected to excessive
-loads for which it is not designed.
-Incorrect storage of the unit.
-Damage sustained in transit.
-Correct certification is illegible.
-Functionality errors occur.
-Permitted tolerances or threshold values have been exceeded.
13