deXlan 050862 user manual Appendix a Router Configuration

Appendix A: Router Configuration

Microsoft (http://www.microsoft.com/hardware/broadbandnetworking)

MN-100 – Wired Base Station

MN-500 – Wireless Base Station

1.Log into your router using your router IP.

2.Open the Bass Station Management Tool, and then click Security.

3.On the Security menu, click Port Forwarding, and then click Set up persistent port forwarding.

4.In the Enable checkbox, check in the checkbox.

5.In the Description box, type a description of the server field such as: IP Camera Web.

6.In the Inbound port boxes, type in: 80 – 80. (i.e. from Port 80 to Port 80)

7.In the Type box, select the protocol as TCP.

8.In the Private IP address box, type in the IP Address of the IP Camera network camera. For example, type in: 192.168.0.5.

9.In the Private port boxes, these values are automatically filled in from Step 6 and should already show 80 – 80.

10.On the next empty line, repeat steps 4-9, except this time the Description should be IP Camera Cam and the Inbound/Private port boxes should be 9001 – 9001 (UDP). The protocol and private IP address should be the same.

11.Click Apply to save the changes you have made. IP Camera should now be configured to work with your router and be accessible from the internet.

iCAMView user manual -76-