DeWalt 1 appendix Changing the Msde ‘sa’ Password, Password Changed Confirmation Dialog Box

Chapter 2 Setting Up BBSM Hotspot

Changing the Default Security Passwords

Figure 2-24 Password Changed Confirmation Dialog Box

Step 8 Click OK to close the dialog box. The Computer Management window reappears.

Step 9 Close the Computer Management window.

Changing the MSDE ‘sa’ Password

The system administrator (‘sa’) login is a default system administrator login that is included with every MSDE installation. Use the following procedure to change the default MSDE ‘sa’ password.

Step 1 From the Dashboard, click Hotspot Configuration. The Server Settings web page appears. Step 2 In the NavBar, click Security/SSL. The Security/SSL web page appears.

Step 3 Next to Change MSDE ‘sa’ Password, click Change. The MSDE ‘sa’ Password Form appears. (See Figure 2-25.)

Note You cannot change this password without knowing the current password. Save this password in a secure location.

Figure 2-25 MSDE ‘sa’ Password Form

Step 4 In the Enter current password field, enter the current ‘sa’ password.

Step 5 In the Enter new password field, enter the new password.

Step 6 In the Confirm new password field, reenter the new password again.

Cisco BBSM Hotspot 1.0 User Guide

78-15293-01 2-25