Draytek Vigor2700VGi, Vigor2700Gi, 2700 Series Installing Your Router, Hardware Installation

2. Installing Your Router

This section will guide you to install the router through hardware connection and configure the router’s settings through web browser.

2.1 Hardware Installation

Before starting to configure the router, you have to connect your devices correctly.

1.Connect the ADSL interface to the external ADSL splitter with an ADSL line cable.

2.Connect one port of 4-port switch to your computer with a RJ-45 cable. This device allows you to connect 4 PCs directly.

3.Connect one end of the power cord to the power port of this device. Connect the other end to the wall outlet of electricity.

4.Power on the router.

5.Check the ACT and ADSL2+, LAN LEDs to assure network connections.

(For the detailed information of LED status, please refer to section 1.1.)

PWR

4

ADSL2+ ACT

3

5

Factory
Reset	4	3	2	1	LAN
ADSL2+

1	2
	ADSL
Internet	Splitter
	or
Land line jack	(Microfilter)

11