3.2.2General Settings
1.On the Wireless LAN group, select General Settings. The following page will be shown.
2.Check the box Enable Wireless LAN to enable the wireless function.
3.Select an appropriate wireless mode.
Mixed (11b+11g)
11g only
11b only
The router can connect to IEEE802.11b and IEEE802.11g stations simultaneously. This is default settings. Choose this mode if you have no idea to change the mode.
The router can connect to IEE802.11g stations. The router can connect to IEE802.11b stations.
4.Type in the name of the SSID and Channel. The default name for SSID is default. We suggest you change it to a particular name for your necessity.
SSID (service set | It is used to name the wireless LAN for this router, and it must |
identifier) | have the same content in client PC/notebook wireless card(s). |
| SSID can be any text numbers or various special characters. |
Channel | It is a wireless channel for the router. The default channel is 6. |
| You can change it to an appropriate one if the selected |
| channel is under serious interference. Or you can select Auto |
| to allow the system sensing available channel automatically. |
18