DeWalt MD3220I manual

Page 30

Dell PowerVault MD32xxi Configuration Guide for VMware ESX4.1 Server Software

2.Under iSCSI Access you can choose to use an IP Address or Initiator Name.

3.To find the iSCSI Initiator Name from the vCenter GUI go to Configuration -> Storage Adapters. Click on the iSCSI Software Adapter. The iqn can be copied and pasted into the Group Manager interface for the Initiator Name.

There is another check box option for “Disallow un-named discovery sessions”.

Page 28

Image 30

Contents Page Page Table of Contents Terminology/Glossary Introduction Implementing ESX4.1 on the MD32xxi Storage ArrayArchitectural Setup Supported Hardware and SoftwareEstablishing Sessions to a SAN PowerVault MD32xxi Storage Setup and Configuration Select Manually Define Hosts Page ISCSI Software Initiator Configuration on ESX4.1 Server Select Configuration-Security Profile on the ESX serverPage Page Clustering with ESX4.1 / Creating DRS Clusters Configure vSwitch & Enable Jumbo Frames Add iSCSI VMkernel PortsPage Assign Network Adapters Page Page Associate VMkernel Ports to Physical Adapters Page Page Enable VMware iSCSI Software Initiator Page Binding VMkernel Ports to iSCSI Software Initiator Static Connect to PowerVault MD32XXi Storage Click the Dynamic Discovery tabPage Page Page Connect to a Volume on PowerVault SAN Contact Information Enabling VMware Native Multipathing MRUStep A1 Configure vSwitch and Enable Jumbo Frames Appendix aStep A2 Add iSCSI VMkernel Ports Networking Step A3 Assign Network Adapters Step A4 Associate VMkernel Ports to Physical Adapters Page Step A5 Enable VMware iSCSI Software Initiator Step A6 Binding VMkernel Ports to iSCSI Software InitiatorPage Vmk5 iSCSI6 IPv4 Step A7 Connect to the Dell PowerVault Storage