Eaton Electrical Disconnect Switches manual Line Lug Data, Disconnect Switch Type

December 2004

Operating Mechanisms with Disconnect Switches	25
– Variable Depth

Technical Data and Specifications

Datum

A D E F

Datum

C

G

1.62 (41.1)

.62Min.

(15.7)

B

Figure 15. Mounting Dimension Requirements

Table 18. Mounting Dimension Requirements

in Inches (mm)

Disconnect Switch Type	A	B	C	D	E	F	G
30A and 60A Non-fusible	See	See	1.56	.96	4.00	3.50	7.12
30A and 60A Fusible	Dimensions	Dimensions	(39.6)	(24.4)	(101.6)	(88.9)	(180.8)
	Below	Below	1.56	.96	4.00	3.50	9.75
100A Non-fusible			(39.6)	(24.4)	(101.6)	(88.9)	(247.7)
			1.75	1.10	5.50	3.38	7.12
			(44.5)	(27.9)	(139.7)	(85.9)	(180.8)
100A Fusible			1.75	1.10	5.50	3.38	11.88
200A Non-fusible and Fusible			(44.5)	(27.9)	(139.7)	(85.9)	(301.8)
			3.34	0.63	8.50	1.84	15.50
			(84.8)	(16.0)	(215.9)	(46.7)	(393.7)

Table 19. Line Lug Data

Disconnect Switch Size	Wire Size
30 Ampere	#2 – 14 Cu/Al
60 Ampere	#2 – 14 Cu/Al
100 Ampere	1/0 – 14 Cu/Al
200 Ampere	250 kcmil – #6 Cu/Al

Dimension A = The required wire bending spacing selected from Article 430-10 of the National Electrical Code.

Dimension B = Minimum or maximum depth from inside of flange holding operating handle to panel where Disconnect Switch is mounted. (Variable 7 to 16 inches.)

For more information visit us at: www.eatonelectrical.ca