TransPort® WR44v2 Installation Guide
To stop the DHCP server from serving addresses, use the following command:
Command Description
DHCP 0 IPMIN X Removes the minimum IP address that will be server via DHCP, disabling the DHCP server
As an example, to stop the DHCP sever from DHCP requests, enter the command DHCP 0 IPMIN !. The ! variable is used to remove a value or set it back to its default.
To retain the DHCP server, but on a different subnet, the following parameters will need to be configured:
Command | Description |
DHCP 0 IPMIN x.x.x.x | Minimum IP address to assign, the start of the DHCP pool |
DHCP 0 IPRANGE | The number of IP addresses in the DHCP pool |
DHCP 0 GATEWAY x.x.x.x | The IP gateway address the DHCP clients should use |
| (normally this router’s LAN IP address) |
DHCP 0 MASK x.x.x.x | The subnet mask DHCP clients should use |
DHCP 0 DNS | The DNS server DHCP clients should use |
For more information on CLI commands, visit http://www.digi.com/support/ and view the various reference manuals available.
Page 20