Edimax Technology RAS108, RAS106 manual Leds & Buzzer, LEDs

Page 16

4-1 LEDS & BUZZER

CHAPTER 4 LEDS & BUZZER

LEDs

RAS106/108 LEDs are located in the front panel. Please refer to the section of "Front & Real Panel Description" under Chapter 1 "Introduction" for the detail location of each LED.

READY LED: When a PC is properly connected and the PC is powered on, the READY LED corresponding to that PC will be lit.

ACTIVE LED: Indicate the currently selected PC. Only one ACTIVE LED will be lit although more than one computers are connected.

SCAN LED: LED is lit when RAS106/108 is operating at automatic SCAN mode.

BUZZER

RAS106/108 has a built-in buzzer provide audio confirmation of PC switch and activation/deactivation of SCAN mode.

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Users Guide Copyright & Trademarks Contents Introduction General InformationFeatures Package Contents Specifications Model RAS106 RAS108Connectors and Cables Console ConnectorsFront & Real Panel Description Connecting The Peripherals Operating EnvironmentConnecting The PCs Connecting Power Adapter PC Selection Method Keyboard Hot KeysTo select a PC directly Select Push ButtonReset Button Leds & Buzzer LEDsTrouble Shooting Lose mouse controlLose keyboard control Wheel mouse does not function properlyUnable to switch PC II. Cable Kits for Genie KVM Switches CPU Switch Series Product Information Genie KVM Switch SeriesAppendix a Product Information Appendix A-2 -- Product Information To contact Edimax customer support Customer Support Hours
Top Page Image Contents