3.Lose keyboard control
+Do not type any key on the keyboard before the channel is completely switched to new PC as indicated by the change of display screen.
+Make sure the keyboard is firmly plugged into the console connector.
+Make sure all the cables are firmly plugged into the PC port connectors.
+Try to switch to another channel and switch back.
+Press Reset button.
4.Wheel mouse does not function properly
+Make sure wheel mouse driver is installed on every PC.
+RAS106/108 supports only
+Press Reset button.
5.Mouse and keyboard do not respond instantly after PC switching
+Do not move the mouse or typing keyboard before RAS106/108 completes the PC switching. If RAS106/108 detects mouse or keyboard signals input from current PC before the switching is complete, it will delay the PC switching until there's no more signal input.
In such case, you will feel slight delay in the response of mouse pointer or keyboard. Stop moving the mouse or typing the keyboard, and RAS106/108 will complete
the switching immediately.