CONSOLE ON/OFF, etc…
15 ☼SYSTEM 15 16 SYSTEM 16
OSD : 1 0 SEC. ( CHANGE PASSWORD SCAN: 1 0 SEC. CONSOLE ON/OFF
ESC : QUIT | ENTER :COMPLETE |
TAB : NEXT | INSERT :EDIT |
|
|
a.The “ OSD: 10 SEC” means that the OSD windows display or PC system name exists 10 sec. on your monitor. You can modify it from 05 sec to 99 sec. The factory default value is 10 sec..
b.The “ SCAN TIME” means that scan interval from one PC port to next PC port. The default SCAN time is 10 sec and the maximum scan time is 99 sec.
c.The “ CHANGE PASSWORD” is for user to avoid all PC systems to be intruded by the other person. The default password is 8 digits “ 00000000 “.
ENTER PASSWORD : █
ESC : QUIT ENTER : COMPLETE
There is an enter password window showed out when you select this item and then press the Enter. The maximum password is eight digits. After you key in the password already and press the Enter key, there is another window for confirming your typed password.
ENTER NEW PASSWORD : █
ESC : QUIT ENTER : COMPLETE
RETYPE NEW PASSWORD : █
ESC : QUIT ENTER : COMPLETE
You need to retype the password again for rechecking your previous
is matched or not.
NEW PASSWORD COMPLETE
ESC : QUIT ENTER : COMPLETE
d.The “ CONSOLE ON/OFF “ means to manage the console of KVM switch. If you select “ CONSOLE ON “, it means that any user can use the console. If you select “ CONSOLE OFF “(factory default OFF state), it means that any user will not be allowed to use the console unless you enter the password. When you enter the password already and pass the KVM switch authentication, the CONSOLE will be set to ON. After you finish using KVM switch, please don’t forget to set up CONSOLE ON state to OFF state. Besides, if current CONSOLE is ON state and you reset KVM