Edimax Technology EK-08RO, EK-16RO user manual Hardware Installation, Step

Page 7

Hardware Installation

Before installation, please make sure all of peripherals and computers have been turned off. This example of installation is based on 8 port KVM Switch and 16 port KVM Switch have the same installation procedures

Step 1

Find a convenient place to put your KVM Switch. Its 19” rack mount form factor makes it ideal stackable on 19” rack. When stacking to a rack, attach the included brackets to the sides of the KVM Switch. Take note of the length of your cables so that your computers, KVM Switch, keyboard, mouse and monitor are distanced properly.

Step 2

Connect the monitor to the KVM Switch. Using the attached cable, or the one included with your monitor, connect it to the HD DB-15 female port on the back of the KVM unit labeled with the monitor symbol at the CONSOLE port connector.

Step 3

Connect the keyboard to the KVM Switch. If you have an AT type keyboard, you will need an AT to PS/2 adapter.

Page 6 Page 8
Image 7
Page 6 Page 8
Contents User’s Manual Table of Contents Introduction FeaturesPackage Contents Model No Technical SpecificationsCable Diagrams Step Hardware InstallationConnect the mouse to the KVM Switch Segment LED Indication Power on state of 8/16 port KVM switchUsage Push ButtonsBelow are the different hot key commands Keyboard Hot Key CommandsReflash Daisy Chain Connection DiagramHot Plug System On Screen Display OperationEnter NEW Password ROM Reflash Troubleshooting Certificates Accessories
Top Page Image Contents