Edimax Technology ES-5240G+ user manual Radius IP

Page 72

Mode:

Enable or disable 802.1X function.

RADIUS IP:

RADIUS server IP address for authentication. Default: 0.0.0.0

RADIUS UDP Port:

The port number to be used communicate with RADIUS server for the authentication service. The valid value ranges 1-65535.

Default port number is 1812. RADIUS Secret:

The secret key between authentication server and authenticator. It is a string with the length of 1 – 15 characters. The character string may contain upper case, lower case and 0-9. It is character case sensitive. A blank in between any two characters is not allowed.

Default: None Admin State:

This is used to set the operation mode of authorization. There are three types of operation mode supported, Force Unauthorized, Force Authorized and Auto.

yForce Unauthorized:

The controlled port is forced to hold in the unauthorized state.

yForce Authorized:

The controlled port is forced to hold in the authorized state.

yAuto:

The controlled port is set to be in authorized state or unauthorized state depends on the result of the authentication exchange between the authentication server and the supplicant.

Default: Force Authorized Port State:

Show the port status of authorization. Re-authenticate:

Specify if subscriber has to periodically re-enter his or her username and password to stay connected to the port.

Re-authenticate All:

Re-authenticate for all ports in at once.

66

Page 71 Page 73
Image 72
Page 71 Page 73
Contents ES-5240G+ Port GbE Web Smart Switch Version 1.0 / JuneCopyright Table of Contents 100 Electronic Emission Notices Federal Communications Commission FCC StatementPage Overview of 24-Port GbE Web Smart Switch Key Features in the DeviceVlan Checklist FeaturesHardware ManagementPage View of 24-Port GbE Web Smart Switch User Interfaces on the Front Panel Button, LEDs and PlugsLED Indicators User Interfaces on the Rear PanelSystem LED 10/100/1000Ethernet TP Port 1 to 24 LEDView of the Optional Modules Front View of 1000Base-SX/LX LC, SFP Fiber TransceiverStarting 24-Port GbE Web Smart Switch Up Hardware and Cable InstallationConnecting the SFP Module to the Chassis TP Port and Cable Installation Power OnCabling Requirements Firmware LoadingCabling Requirements for TP Ports Cabling Requirements for 1000SX/LX SFP Module1000Base-X TP, Fiber 100Base-TX TP 100Base-FX Fiber Typical Network Topology in DeploymentNo Vlan Configuration Diagram Case 2b Port-based Vlan See -4 Page Managing 24-Port GbE Web Smart Switch through Ethernet Port Management through Ethernet PortLogin Screen for Web IP Address Assignment110 10000000.00000001.00000010.1 Prefix Length No. of IP matched No. of Addressable IP Page Typical Applications 10 Network Connection between Remote Site and Central Site11 Peer-to-peer Network Connection Basic Concept and Management What’s the EthernetIEEE802.3 CSMA/CD MAC Snap STP BpduARP Media Access Control MAC SAP FormatPRE SFD FCSPage How does a MAC work? Bytes DTE Flow Control Page Bits How does a switch work? Collision Domain Page Page Virtual LAN Page CFI Tag FormatPage Page How does a Tagged Vlan work? VIDLink Aggregation 10 Example of Link Aggregation Application Operation of Web-based Management Web Management Home Overview Information of Page Layout Lacp Rstp SnmpSystem Configuration Function descriptionPage Page Port Configuration ON/OFFVlan Mode Configuration Port ConfigurationSelect Vlan Mode Vlan Group Configuration VIDAdd or Remove Vlan Member 10 Aggregation/Trunking Configuration Aggregation11 Lacp Port Configuration LacpRstp Rstp Port Configuration Page Page Page Port Mode Port Control Authentication Port Status Radius IP 16 802.1X Configuration 802.1x Parameters Igmp Snooping Vlan IDMirror Configuration 20 Mirror ports configurationQoSQuality of Service Configuration 21 QoS ConfigurationQoS Configuration Dscp Setting Filter Dhcp24 Filter Configuration 25 Rate Limit Configuration Rate Limit26 Storm Control Configuration Storm ControlParameter description Snmp Parameters description27 Snmp Configuration Monitoring Statistics Overview 28 Statistics Overview for all portsDetailed Statistics Page Page 29 Detailed Statistics for each port Lacp Status 30 Lacp StatusRstp Status 31 Rstp Status Igmp Status 32 Igmp Status Ping Status 33 Ping Maintenance Warm Restart 34 Warm RestartFactory Default Software Upgrade 36 Software UpgradeConfiguration File Transfer Function descriptionLogout Resolving No Link Condition Q&AAppendix a Technical Specifications ƒ Network Interface SFPƒ MAC Address and Self-learning 8K MAC address ƒ Cable and Maximum Lengthƒ Diagnostic LED ƒ Power RequirementAmbient Temperature DimensionsManagement Software Specifications PRIVATE-ES-5240G+-MIB Definitions = Begin Imports From RFC1213-MIBFrom RFC1155-SMI OBJECT-TYPE

ES-5240G+ specifications

Edimax Technology ES-5240G+ is a highly versatile and efficient Ethernet switch designed to cater to the networking needs of small to medium-sized businesses and home offices. With its robust features and reliable performance, this switch is an essential component for a seamless network infrastructure.

One of the standout features of the ES-5240G+ is its 24 10/100/1000Mbps Gigabit Ethernet ports. This allows for high-speed connectivity, enabling users to transfer large files quickly and efficiently. The switch is equipped with a non-blocking architecture, ensuring that all ports can be utilized simultaneously without any reduction in bandwidth. This is particularly beneficial for businesses that rely on high-speed internet and internal networks for their daily operations.

The ES-5240G+ supports advanced Layer 2 switching features, including VLAN (Virtual Local Area Network) support, port mirroring, and link aggregation. These features enhance network management and optimization, making it easier to segment network traffic and improve security. With VLAN support, users can create separate networks within the same switch, leading to improved performance and reduced broadcast traffic.

Moreover, the ES-5240G+ incorporates IEEE 802.3x Flow Control, which helps to prevent data loss during heavy traffic periods. This technology allows for effective communication between devices and ensures smooth data transmission, even in congested network environments. Additionally, the switch is equipped with Automatic MDI/MDI-X detection, eliminating the need for crossover cables and simplifying installation.

From a security perspective, Edimax has included features such as address filtering and port security, which help to protect the network from unauthorized access. The switch can restrict access to specific MAC addresses, providing an added layer of security for sensitive data.

In terms of energy efficiency, the ES-5240G+ is designed to comply with IEEE 802.3az Energy Efficient Ethernet standards. This technology helps to reduce power consumption during low-traffic periods, making it an eco-friendly choice for businesses looking to minimize their carbon footprint.

Overall, Edimax Technology ES-5240G+ stands out as a reliable and efficient Ethernet switch, equipped with a range of features that enhance network performance and security. Its capabilities make it an ideal choice for businesses seeking to streamline their networking infrastructure and improve operational efficiency.
Top Page Image Contents