Chapter 2
Installing the W-3000 Series
Controllers
The following tools and equipment are required for installing the Dell PowerConnect
zRack Mount Bracket (x2, not used for tabletop installation)
zSuitable Screwdrivers
zAC Power Cord
Caution: Installation and service of Dell Networks products should be performed by Professional Installers. Additional antenna and transmit power information for Professional Installers can be found at https://support.dell.com.
For a Telecom Rack:
z
z
For a Server Rack:
z
zM6 x 20mm Phillips Head Screws (4x, included)
zM6 Cage Nuts (4x, inluded) or M6 Cage Clips (4x, inluded)
Installation in a Telecom Rack
To install the
1.Place a rack mount bracket over the mounting holes on one side of the controller (see Figure 1).
2.Secure the bracket to the controller using three
3.Repeat these steps on the opposite side of the controller.
Dell PowerConnect | Installing the |