CyberPower Systems CP-H720P quick start Installation, Self-Powering the Hub

Page 9

Installation

This USB Hub is a plug and play device. Your computer will display the Add New Hardware Wizard after connecting the hub to your computer. Installation may be done whether your computer is powered on or off. It is not necessary to restart your computer after installation.

1)Connect the USB A-mini B cable (included in this package) to the Upstream port on the USB Hub, then connect the other end of the cable to an unused USB port on your computer.

2)Connect your USB devices to the Downstream ports on the USB Hub.

Self-Powering the Hub:

If additional power is required for connected USB devices, plug the DC power adapter into the power jack, then plug the power adapter into a wall outlet.

NOTE:

Please use this USB 7-Port Hub under Self-Power Mode.

6

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Quick Start Guide For USB 2.0 7-Port Hub Page Table of Contents Introduction System Requirements Package ContentsSpecifications Product Overview Root Upstream Port AC Adapter Power ConnectionSelf-Powering the Hub InstallationAppendix a TroubleshootingRadio & TV Interference Statement Appendix BAppendix C Lifetime Limited WarrantyContact Information K01-H720P00
Top Page Image Contents