Dell PCM8024-k, PCM6348, PC8024F, PC7000, PCM6220 Dell PowerConnect Firmware CLI Transition Guide

Dell PowerConnect™ Firmware CLI Transition Guide

Feature	Previous Implementation	Dell™ PowerConnect 4.x Implementation
IPv6	ipv6 pimsm join-prune-	This command is replaced by the ipv6 pim join-prune-
Multicast	interval	interval command.
IPv6	ipv6 pimsm register-	This command is replaced by the ipv6 pim register-rate-
Multicast	threshold	limit command.
IPv6	ipv6 pimsm rp-address	This command is replaced by the ipv6 pim rp-address
Multicast		command.
IPv6	ipv6 pimsm rp-candidate	This command is replaced by the ipv6 pim rp-candidate
Multicast		command.
IPv6	ipv6 pimsm spt-threshold	This command is replaced by the ipv6 pim spt-threshold
Multicast		command.
IPv6	ipv6 pimsm ssm	This command is replaced by the ipv6 pim ssm
Multicast		command.
IPv6	show ipv6 pimdm	This command is removed. Refer to the IPv6 Multicast
Multicast		Commands section in the CLI REFERENCE GUIDE.
IPv6	show ipv6 pimsm interface	These commands are replaced by the show ipv6 pim
Multicast	and show ipv6 pimdm	interface command.
	interface
IPv6	show ipv6 pimsm neighbor	These commands are replaced by the show ipv6 pim
Multicast	and show ipv6 pimdm	neighbor command.
	neighbor
IPv6	show ipv6 pimsm rp mapping	This command is replaced by the show ipv6 pim rp
Multicast		mapping command.
IPv6	show ipv6 pimsm rphash	This command is replaced by the show ipv6 pim bsr-
Multicast		router command.
IPv6 Routing	ipv6 forwarding	This command is deprecated. Refer to the IPv6 Routing
		Commands section in the CLI REFERENCE GUIDE.
Multicast	ip pim-trapflags	This command is deprecated by the snmp-server enable
		traps pim command.
Multicast	ip pimsm	This command is replaced by the ip pim dense and ip
		pim sparse commands.
Multicast	ip pimsm bsr-border	This command is replaced by the ip pim bsr-border
		command.
Multicast	ip pimsm bsr-candidate	This command is replaced by the ip pim bsr-candidate
		command.
Multicast	ip pimsm cbsrhaskmasklength	These commands are replaced by the ip pim bsr-
	and ip pimsm cbsrpreference	candidate command.
Multicast	ip pimsm dr-priority	This command is replaced by the ip pim hello-interval
		command.
Multicast	ip pimsm join-prune-interval	This command is replaced by the ip pim join-prune-
		interval command.
Multicast	ip pimsm register-threshold	This command is replaced by the ip pim register-rate-
		limit command.
Multicast	ip pimsm ssm	This command is replaced by the ip pim ssm command.
April 6, 2011		Page 20