everything is connected correctly, make sure the connections are correctly marked or identified. Then follow the instructions in "Mounting the CD Changer and Its Components."
MOUNTING THE CD CHANGER AND ITS COMPONENTS
Before you mount the CD changer and its components, be sure it is connected correctly. Then disconnect the cable from the vehicle battery's negative
Mounting the CD Changer
1.Set H/45/V on both sides of the CD changer for the mounting axis you chose.
H/45/V is preset to H (horizontal). If you are mounting the CD changer horizontally, leave H/45/V as it is and continue with Step 2.
If you are mounting the CD changer at a
If you are mounting the CD changer vertically, use a small Phillips screwdriver to remove the screw from H, use the supplied tool to turn H/45/V to V (vertical), then replace the screw into V on both sides of the CD changer.
CAUTION: If you do not set H/45/V on both sides of the CD changer to the correct mounting axis, the CD changer might skip during play.
HINT: Save the tool in case you ever want to install the CD changer in another vehicle or change the mounting location. You can secure it to the back of the CD changer with a piece of tape.
2.Use a
If you are mounting the CD changer horizontally, attach both mounting brackets to the CD changer.
If you are mounting the CD changer at a
If you are mounting the CD changer vertically, attach both mounting