Optimus 120-2180 manual

Page 18

one of the supplied fuses. Check both fuses.

WARNING: Before you begin, disconnect the cable from the vehicle battery's negative (-) terminal.

1.Unlatch the two latches on the fuse holder so the holder springs open.

2.If either fuse is blown, replace it. Use only standard 1 1/4-inch fuses with the proper rating. The red power wire's fuse must be 1.0 amp, and the yellow continuous power wire's fuse must be 2.0 amps.

CAUTION: The supplied spare fuses have the proper ratings. Make sure you replace a fuse only with another fuse of the same rating.

3.Reassemble the fuse holder only squeezing it together.

4.Reconnect the cable to the vehicle battery's negative (-) terminal.

Image 18
Contents Page Page Before YOU Begin the Installation CHOOSING/PREPARING the Mounting AreasCD Changer FM ModulatorCommander Removing the Shipping ScrewsConnecting the FM Modulator Testing the Connections Connecting the CD ChangerConnecting the Commander Checking the ConnectionsMounting the CD Changer and ITS Components Setting the FM Frequency Mounting the CommanderReconnecting the Vehicles Battery Mounting the FM ModulatorChanging the Displays Color Loading and Unloading CDS Loading and Unloading the CD MagazinePage Selecting a Specific CD Automatic Search Music System AsmsAudible Search Intro ScanSwitching Between CD/RADIO Shuffle PlaySymptom Possible Cause Suggestion Page Resetting the CD Changer Replacing a FusePage COMMANDER/FM Modulator Ground Wire Color Wire Specs Label Remark WHT/BLKFront L Strip Solder 2P Cord GRY/BLK Front R Black ORG/WHT Dimmer Strip Solder PINK/WHT Phone Mute WhiteGray Front R+ Green Rear L+ Violet Rear R+ RED Ignition Trans Strip Solder Yellow 250/ 1A Fuse StripGreen Right + BR/BLK RearWH/BLK GRAY/BLK