Mark Levinson N26 manual To PLS-226 To AC mains = Line hot = Neutral = Earth ground

Page 16

Power connection and system activation

AC power cord polarity

Turning off the Nº26

2.Using a 3/32" Allen key, remove the four 4-40 socket-head cap screws securing the end caps on the read of the Nº26's chassis.

3.Using a Phillips screwdriver, remove the four 4-40 screws securing the Nº26's top plate. Carefully slide the top plate to the rear and remove it.

4.Adjust the gain switches (using a ballpoint pen or similar instrument) and install optional loads as desired.

5.Reassemble the Nº26.

Be sure all associated equipment is disconnected from the AC mains.

After making all signal connections and internal adjustments, connect the DC cable to either of the DC connectors on the rear panel of the PLS-226.

Connect the other end of the DC cable to the POWER SUPPLY INPUT connector on the rear panel of the Nº26.

Connect the AC cord to the male IEC connector on the rear panel of the PLS-226, then connect the AC cord to the AC mains.

To PLS-226

To AC mains

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

= Line (hot)

1 2

1

2

2

= Neutral

 

 

 

3

= Earth ground

3

 

3

 

 

The LEDs on the PLS-226 and Nº26 will light. Allow the Nº26's circuitry to stabilize for 1 to 2 minutes, then connect all associated equipment to the AC mains and activate it.

For optimal sonic performance and longevity, the Nº26/PLS-226 is designed to remain powered at all times (a power-on/power-off switch isn't provided).

Before connecting or disconnecting the PLS-226 from the AC mains, be sure that the Nº26's OUTPUT LEVEL is set to OFF (the lowest position), and that your power amplifiers are turned off.

10

Image 16
Contents Operating Manual Madrigal Audio Laboratories, IncRisk of Electric Shock Do not Open Important safety instructions Page Table of contents Page Front panel Record SelectorMonitor Selector Input SelectorBalance 1, Balance Output LevelSTEREO/MONO Rear panel Balanced OutputMain OUT TunerPower Supply Input Tape 1 OUT, Tape 2 OUTTape 1 IN, Tape 2 PHONO/AUXUnpacking and placement Voltage selection IndicationSet-up and installation Optional load Component Balanced input gain settings To PLS-226 To AC mains = Line hot = Neutral = Earth ground Care and maintenance Specifications Dimensions Dimensions, PLS-226, top view Madrigal Audio Laboratories

N26 specifications

The Mark Levinson N26 is a distinguished high-performance audio component that showcases the brand's commitment to exquisite sound quality and advanced technology. Renowned for its exceptional engineering, the N26 is an integral part of any audiophile's setup, offering a combination of precision, elegance, and power.

At its core, the N26 is a state-of-the-art stereo preamplifier that delivers uncompromising audio performance. One of its primary features is the use of a fully differential signal path, which helps to minimize noise and distortion, ensuring pristine sound reproduction across all frequency ranges. This technology contributes to the unit's ability to deliver an expansive soundstage, allowing listeners to experience music with remarkable clarity and depth.

Another standout characteristic of the N26 is its versatile connectivity options. It is equipped with a variety of analog and digital inputs, including XLR and RCA connectors, as well as high-resolution digital inputs that support audio formats up to 24-bit/192kHz. This ensures seamless integration with a wide range of source components, from vinyl turntables to high-definition streaming devices.

The preamplifier’s user-friendly interface is another highlight. The N26 features a dedicated OLED display that provides clear visibility of settings and source selections. Additionally, the intuitive remote control allows for easy adjustments from anywhere in the room, making it convenient for users to enjoy their audio experience without hassle.

Mark Levinson's dedication to build quality is evident in the N26’s design. The chassis is crafted from premium materials that not only enhance its aesthetic appeal but also contribute to its overall durability. The component is engineered to minimize resonance and vibration, further enhancing sound quality.

In terms of power management, the N26 employs advanced power supply technologies that help to maintain stability and performance even during dynamic playback. This is crucial for handling complex musical passages without compromising clarity or detail.

Overall, the Mark Levinson N26 represents a perfect fusion of artistry and technology, making it a desirable option for audio enthusiasts looking to elevate their listening experience. With its advanced features, versatile connectivity, and stunning performance, the N26 stands out as a premier choice for those who demand nothing less than the best in audio reproduction.