Mark Levinson N33H Specifications, All specifications are subject to change at any time

Page 27

Rated power output:

Frequency response: Signal-to-Noise ratio:

Input impedance:

Voltage gain:

Input sensitivity:

Power consumption: Mains voltage:

Overall dimensions: Shipping weight:

Connector complement:

Output impedance:

Specifications

The correlation between published specifications and performance is unreliable. Measurements of your amplifier yield excellent results by any standards. However, only those specifications that apply to its actual operation are included here.

All specifications are subject to change at any time.

•34.6 Vrms (150 W) @ 8Ω

•34.6 Vrms (300 W) @ 4Ω

All of the above power ratings were measured as continuous (rms) power from 20Hz–20kHz with no more than 0.3% THD.

•Within 0.2 dB from 20Hz to 20kHz

•–75 dB CCIR

•100kΩ (balanced)

•50kΩ (unbalanced)

•26.8 dB

•1.59V (full-rated output)

•360W in idle; 130W in standby

23

•Determined by the requirements of the country for which the unit was manufactured; cannot be reset by dealer or user

•See “Dimensions”

•220 pounds (100 kg)

•Four custom binding posts

•One 3-pin XLR balanced input connector

•One RCA input connector

•Two 1⁄8" mini-jacks for remote turn-on

•Two Mark Levinson communications ports on RJ-11

•One captive high-current AC receptacle

•Less than 0.05Ω from 20–20,000Hz

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Nº33H Monaural Power Amplifier Important Safety Instructions FCC Notice Documentation Conventions Table of Contents Opening the Shipping Crate UnpackingMoving the Nº33H Product Registration Installation Considerations PlacementVentilation Power Requirements Warm-up & Break-in Period Continuous Operation Massive Power Supply AC Power Regeneration Special Design FeaturesPage Page Indicator LED Front PanelStandby button ~ac mains Rear Panel~ac mains relay switch Balanced inputSingle-ended input Loudspeaker binding posts outputs Remote turn-on jacks Slave in & slave out communication portsMaking Link Connections LinkingAll slave chains To create a slave chain that includes the Nº33H Component Requirements & ConnectionsNº320S Link Controls Preamplifier Power AmplifierTroubleshooting No audio and the front panel indicator LED is not litNo audio and the front panel indicator LED is dimly lit If all else fails Nº33H keeps powering offCare & Maintenance All specifications are subject to change at any time SpecificationsDimensions Models Declaration of ConformityManufacturer Type of EquipmentPage

N33H specifications

The Mark Levinson N33H is a premier high-fidelity power amplifier designed for audiophiles who demand the best in sound quality and performance. Renowned for its exceptional engineering and innovative technologies, the N33H stands out in the landscape of luxury audio components.

At its core, the N33H features a robust Class H amplification architecture, which optimizes efficiency and minimizes heat generation while delivering an impressive output power. This design allows the amplifier to react dynamically to musical demands, providing a powerful yet refined sound across various frequencies. With a stable 200 watts per channel at 8 ohms and 400 watts at 4 ohms, the N33H can effortlessly drive a wide range of speakers, ensuring a rich listening experience.

One of the hallmark characteristics of the N33H is its proprietary Pure Class A circuitry in the input and driver stages. This ensures that the amplifier maintains an extraordinarily low level of distortion, delivering crystal-clear audio reproduction even at high volumes. The signal path in the N33H is meticulously designed to preserve audio fidelity, utilizing high-quality components throughout, including precision resistors and capacitors that contribute to its superior soundstage.

The N33H also integrates sophisticated power supply technologies, featuring a dual-transformer configuration that provides stable and clean power, reducing noise and enhancing overall performance. The advanced power management system ensures that the amplifier operates within optimal parameters, further improving sound quality and reliability.

Connectivity options on the N33H are abundant, designed to accommodate modern audio setups. It features balanced XLR and unbalanced RCA inputs, allowing seamless integration with various audio sources. Furthermore, the amplifier includes both traditional speaker binding posts and the option for bi-wiring, providing flexibility in speaker connection.

In terms of design, the Mark Levinson N33H boasts a sleek, elegant chassis that reflects the brand’s commitment to aesthetics as well as performance. The front panel features a minimalist design with a discreet display for signal and operation status, maintaining a sophisticated look suitable for any high-end audio system.

Overall, the Mark Levinson N33H stands as a testament to the brand’s dedication to creating high-performance audio components. With its innovative technologies, exceptional sound quality, and refined design, the N33H is an amplifier that meets the demands of both serious audiophiles and music enthusiasts alike. Whether for a home theater setup or a dedicated listening room, the N33H offers an unrivaled auditory experience that elevates music to new heights.
Top Page Image Contents