Mark Levinson N33H owner manual Moving the Nº33H Product Registration

Page 7

Moving the Nº33H

Product Registration

4.Use a socket wrench to remove:

•The four 9/16-inch hexagonal-head bolts that secure the Nº33H to the base of the crate. These bolts attach directly to the bottom of the Nº33H’s feet and are accessible underneath the pallet on which the Nº33H sits.

•The two 9/16-inch hexagonal-head bolts that hold the retaining bar in place.

Please read and understand these instructions before attempting to move the Nº33H from the shipping crate base.

Note:

Protect delicate floor surfaces before moving the Nº33H off the crate and onto the floor.

1.Position two people at the front of the Nº33H to support its weight; a third person may be needed to hold the base of the crate in place while the Nº33H is moving.

2.When all people are in position, carefully slide the Nº33H off of the crate’s base and onto the floor.

As the front of the Nº33H clears the front edge of the crate, the two people positioned at the front of the Nº33H must

begin to support its weight. To do this, use the “handle” built 3 into the sculpted faceplate (located just above the Mark

Levinson logo) or the front heat sinks.

3.Continue to slide the Nº33H forward until its center section clears the front edge of the base. Then lower the front of the Nº33H to the floor.

At this point, the floor should support the front of the Nº33H and the base of the crate should support the rear.

4.Position two people at the rear of the Nº33H; a third person may be needed to slide the base of the crate out from underneath the Nº33H.

5.Grip the rear heat sinks. Then lift the rear of the Nº33H, leaving the front supported by the floor.

6.When the rear of the Nº33H is lifted, slide the base of the crate out from underneath the Nº33H, then carefully lower the rear of the Nº33H to the floor.

Please register your Nº33H Monaural Power Amplifier within 15 days of purchase. Register online at www.marklevinson.com or complete and return the included product registration card. Retain the original, dated sales receipt as proof of warranty coverage.

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Nº33H Monaural Power Amplifier Important Safety Instructions FCC Notice Documentation Conventions Table of Contents Opening the Shipping Crate UnpackingMoving the Nº33H Product Registration Placement Installation ConsiderationsVentilation Power Requirements Warm-up & Break-in Period Continuous Operation Massive Power Supply AC Power Regeneration Special Design FeaturesPage Page Front Panel Indicator LEDStandby button ~ac mains Rear PanelBalanced input ~ac mains relay switchSingle-ended input Loudspeaker binding posts outputs Remote turn-on jacks Slave in & slave out communication portsMaking Link Connections LinkingAll slave chains To create a slave chain that includes the Nº33H Component Requirements & ConnectionsNº320S Link Controls Preamplifier Power AmplifierNo audio and the front panel indicator LED is not lit TroubleshootingNo audio and the front panel indicator LED is dimly lit If all else fails Nº33H keeps powering offCare & Maintenance All specifications are subject to change at any time SpecificationsDimensions Models Declaration of ConformityManufacturer Type of EquipmentPage

N33H specifications

The Mark Levinson N33H is a premier high-fidelity power amplifier designed for audiophiles who demand the best in sound quality and performance. Renowned for its exceptional engineering and innovative technologies, the N33H stands out in the landscape of luxury audio components.

At its core, the N33H features a robust Class H amplification architecture, which optimizes efficiency and minimizes heat generation while delivering an impressive output power. This design allows the amplifier to react dynamically to musical demands, providing a powerful yet refined sound across various frequencies. With a stable 200 watts per channel at 8 ohms and 400 watts at 4 ohms, the N33H can effortlessly drive a wide range of speakers, ensuring a rich listening experience.

One of the hallmark characteristics of the N33H is its proprietary Pure Class A circuitry in the input and driver stages. This ensures that the amplifier maintains an extraordinarily low level of distortion, delivering crystal-clear audio reproduction even at high volumes. The signal path in the N33H is meticulously designed to preserve audio fidelity, utilizing high-quality components throughout, including precision resistors and capacitors that contribute to its superior soundstage.

The N33H also integrates sophisticated power supply technologies, featuring a dual-transformer configuration that provides stable and clean power, reducing noise and enhancing overall performance. The advanced power management system ensures that the amplifier operates within optimal parameters, further improving sound quality and reliability.

Connectivity options on the N33H are abundant, designed to accommodate modern audio setups. It features balanced XLR and unbalanced RCA inputs, allowing seamless integration with various audio sources. Furthermore, the amplifier includes both traditional speaker binding posts and the option for bi-wiring, providing flexibility in speaker connection.

In terms of design, the Mark Levinson N33H boasts a sleek, elegant chassis that reflects the brand’s commitment to aesthetics as well as performance. The front panel features a minimalist design with a discreet display for signal and operation status, maintaining a sophisticated look suitable for any high-end audio system.

Overall, the Mark Levinson N33H stands as a testament to the brand’s dedication to creating high-performance audio components. With its innovative technologies, exceptional sound quality, and refined design, the N33H is an amplifier that meets the demands of both serious audiophiles and music enthusiasts alike. Whether for a home theater setup or a dedicated listening room, the N33H offers an unrivaled auditory experience that elevates music to new heights.
Top Page Image Contents