Optimus STAV-3790 owner manual Digital Connections

OPT 1

31-3046.fm Page 12 Monday, January 29, 2001 12:43 PM

Preparing Your Receiver

Digital Connections

Notes:

•You must remove the DIGITAL IN OPT 1 or 2 jack’s rubber cover in order to connect to either jack.

•Keep the cover in place when you are not using either jack.

You can connect up to three digital output devices to your receiver. Two inputs use the fiber-optic cable, and one uses coaxial digital audio cable.

DIGITAL

IN

PCM/

OPT

1

OPT

2

PCM/

COAX

Note: If you are connecting a LD or DVD player with AC-3 RF, you need a sepa- rate RF demodulator (not supplied). For details, see the manual provided with the RF demodulator.

DIGITAL	DIGITAL	DIGITAL
OUT		OUT
	OUT
OPTICAL	COAXIAL	OPTICAL

CD	DVD
		MD

CD Player DVD MD Recorder

Using the appropriate cable, make connections between the digital out- put jack of your device and the digital input jack on the receiver.

The digital input jacks are assigned to the following function at the fac-

tory. For example, when you select the CD function, the jack input activates.

OPT 1: CD player

OPT 2: MD recorder

COAX: DVD player

You can change this arrangement to suit your needs. See “Initial Setup” on Page 17.

12