Optimus STAV-3790 Muting the Receiver, Loudness Control, Bypassing the Sound Controls, Using ATT

Page 23
SIG SELECT

31-3046.fm Page 23 Monday, January 29, 2001 12:43 PM

Basic Operation

Muting the Receiver

To temporarily mute the sound, press MUTING on the remote control. --MUTING--appears. Press MUTING again to restore the audio level.

Loudness Control

To increase the high and low ranges of sounds for improved audio at a low listening level, press LOUDNESS on the front panel so LOUDNESS ap- pears. Press LOUDNESS again to turn off this feature.

Bypassing the Sound Controls

To bypass your receiver’s sound controls (BASS, TREBLE or any special sound options) so you can hear the audio at its original tonal quality (for example), press DIRECT so DIRECT appears. Press DIRECT again to turn off this feature.

Note: When you turn off the bypass feature, you will have to reselect any desired special sound options (see “Using Advanced Sound Options” on Page 26).

Adjusting the Display Brightness

You can change the display brightness so it is easy for your eyes in a dark environment. Press DIMMER on the remote control repeatedly until you reach the desired brightness level.

Switching Analog/Digital Signal Input

When you connect a device to any of the rear panel digital input jacks, you must switch the input signal for digital or analog.

Select the device desired, then press SIGNAL SELECT (RECEIVER followed by on the remote control). Each time you press the button the

input mode is switched between ANALOG and DIGITAL as shown on the display. When the Dolby Digital signal is input, AC-3appears on the display.

Notes:

• SIGNAL SELECT does not function for any analog device or device that is not assigned to any of the digital input jacks.

 

• Some laser discs have only analog audio signals. If your laser disc

 

is this type, use the ANALOG setting.

 

• The receiver accepts Dolby Digital or PCM (32 kHz/44 kHz/48

 

kHz) digital signals only. For other formats of digital signals, use

 

the ANALOG setting.

 

 

Using ATT

During analog operation, if the receiver receives signals that are too

 

strong, the overload indicator (a dot above the 2nd character position)

 

lights. If this happens, press ATT on the remote control to lower the sig-

 

nal and prevent the distortion. ATT lights on the display.

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Audio/Video Receiver Please read before using this equipmentIntroducing the Optimus STAV-3790 Important Safety Instructions Contents Positioning Speakers Preparing Your ReceiverPreparing Your Receiver Connecting SpeakersSetting the Impedance Selector Switch Preparing the Speaker WiresConnecting the Front Speakers Connecting a Subwoofer Amplifier Connecting Surround-Sound SpeakersConnecting the Center Speaker Connecting MD Recorder Connecting Program SourcesConnecting a CD Player Connecting Cassette DecksConnecting Video Sources DVD 5.1-Channel Inputs Connecting a CamcorderConnecting a Video Monitor Digital Connections FM Antennas Connecting the AntennasAM Antennas Wire Installing Remote Control’s Batteries Using One Remote Control for More than One UnitConnecting to AC Power Using the AC Power OutletSubwoofer On/Off Setting Initial SetupBasic Procedure Speaker Size SettingLow Cut Filter On/Off Setting Initial SetupCrossover Frequency Setting Low Frequency Effect Attenuator SettingDigital Input Setting Dynamic Range Control SettingBasic Operation Basic Operation Tuning the RadioManual and Automatic Tuning Direct Access Tuning Remote Control OnlyListening Safely Using MPX ModeUsing Headphones Memory TuningMuting the Receiver Adjusting the Display BrightnessSwitching Analog/Digital Signal Input Using ATTDubbing a Cassette Tape Cassette Deck/VCR FeaturesUsing the MD/TAPE 1 and Tape 2 Monitor Buttons Monitoring a Program SourceCopying a Video Tape Cassette Deck/VCR FeaturesPlaying and Recording Video Tapes Playing a Video TapeDSP Effect Using Advanced Sound OptionsDolby Digital Dolby Pro Logic SurroundDolby Digital Playback Using Advanced Sound OptionsUsing the Midnight Mode Program Format IndicatorsControl Mode Buttons Using the Remote ControlReceiver/Amplifier Operation Using the Remote ControlCassette Deck Operation CD Player/MD Recorder OperationTurns on/off the DVD/LD player DVD/LD Player OperationTV/CATV Operation VCR OperationBackground Control Satellite Receiver OperationCodes DVD Brand CodeLD Brand Code Tape Brand Code VCR Brand CodeTV Brand Code CD Brand CodeMD Brand Code Catv Brand CodeProblem Cause Suggestion TroubleshootingCare and Maintenance FCC Wants You to Know Video Section SpecificationsAmplifier General SpecificationsFM Tuner AM TunerControl Index to Features by Control NameRadioShack Division of Tandy Corporation Fort Worth, Texas Limited Two-Year Warranty

STAV-3790 specifications

The Optimus STAV-3790 is a cutting-edge robotic platform designed for a variety of applications, ranging from industrial automation to research and development. Engineered for efficiency and versatility, this sophisticated robot incorporates advanced technologies that make it stand out in the competitive landscape of automation tools.

One of the main features of the STAV-3790 is its high-precision navigation system. Utilizing LIDAR technology along with advanced computer vision, the robot can map its environment with remarkable accuracy. This feature allows for seamless movement in complex environments, minimizing the risk of collisions and maximizing operational efficiency. The integration of artificial intelligence algorithms enables the STAV-3790 to learn from its surroundings, adapting to changes in real-time.

The robotic arm of the STAV-3790 is a marvel of engineering. It boasts multiple joints and a high degree of freedom, allowing it to perform a wide range of tasks, from delicate assembly operations to heavy lifting. With a payload capacity that exceeds its competitors, the STAV-3790 can handle various objects, making it ideal for diverse applications in manufacturing and logistics.

Additionally, the STAV-3790 is equipped with an intuitive user interface, allowing operators to program tasks easily and monitor performance in real-time. The onboard control system supports both manual programming and autonomous operation, offering flexibility depending on user requirements. This versatility is enhanced by the robot's ability to connect with other devices and systems within a smart factory environment, facilitating streamlined operations.

Energy efficiency is another hallmark of the STAV-3790. Its advanced power management system optimizes energy consumption, ensuring long operational periods without compromising performance. The robot's design also emphasizes durability, with materials that resist wear and tear, thus extending its lifespan and reducing maintenance costs.

In summary, the Optimus STAV-3790 is a state-of-the-art robotic platform characterized by its high-precision navigation, versatile robotic arm, user-friendly interface, and energy-efficient design. It is primed to meet the demands of modern automation, making it an invaluable asset in various sectors such as manufacturing, logistics, and research. As industries continue to embrace automation, the STAV-3790 represents an impressive blend of advanced technologies and practical application, setting a new standard for robotic solutions.
Top Page Image Contents