5.3 Leaving a Network & Joining another Network
If you want to remove a powerline device from an existing network and add it to another network, follow the following procedures:
Step 1 Press the “Group” button on the adapter to be removed (adapter B) for at least 10 seconds.
Step 2 Wait for adapter B to be disconnected with adapter A & C.
Step 3 Press the “Group” button on an adapter in another network (adapter D) for less than 3 seconds. The Power LED will start to blink.
Step 4 Within 120 seconds after the Power LED starts blinking on adapter D, press the “Group” button on adapter B for at least 3 seconds.
Step 5 Wait for the connection to be established.
26