Edimax Technology Draft 2.0-N, 802.11 b user manual Troubleshooting

Page 64

4-2 Troubleshooting

If you encounter any problem when you’re using this wireless network card, don’t panic! Before you call your dealer of purchase for help, please check this troubleshooting table, the solution of your problem could be very simple, and you can solve the problem by yourself!

Scenario

Solution

I can’t find any wireless access

1.

Click ‘Rescan’ for few more times and see if you can find any wireless

point / wireless device in ‘Site

 

access point or wireless device.

Survey’ function.

2.

Please move closer to any known wireless access point.

 

3.

‘Ad hoc’ function must be enabled for the wireless device you wish to

 

 

establish a direct wireless link.

 

4.

Please adjust the position of network card (you may have to move your

 

 

computer if you’re using a notebook computer) and click ‘Rescan’

 

 

button for few more times. If you can find the wireless access point or

 

 

wireless device you want to connect by doing this, try to move closer to

 

 

the place where the wireless access point or wireless device is located.

 

 

 

Nothing happens when I click

1.

Please make sure the wireless network card is firmly inserted into your

‘Launch config utilities’

 

computer’s PCI slot. If the Ralink configuration utility’s icon is black, the

 

 

network card is not detected by your computer. Switch the computer off

 

 

and insert the card again. If this doesn’t work, contact the dealer of

 

 

purchase for help.

 

2.

Reboot the computer and try again.

 

3.

Remove the driver and re-install.

 

4.

Contact the dealer of purchase for help.

 

 

I can not establish connection

1. Click ‘Connect’ for few more times.

with a certain wireless access

2. If the SSID of access point you wish to connect is hidden (nothing

point

 

displayed in ‘SSID’ field in ‘Site Survey’ function), you have to input

 

 

correct SSID of the access point you wish to connect. Please contact

 

 

the owner of access point to ask for correct SSID.

 

3.

You have to input correct passphrase / security key to connect an access

 

 

point with encryption. Please contact the owner of access point to ask

 

 

for correct passphrase / security key.

 

4.

The access point you wish to connect only allows network cards with

 

 

specific MAC address to establish connection. Please go to ‘About’ tab

 

 

and write the value of ‘Phy_Addess’ down, then present this value to

 

 

the owner of access point so he / she can add the MAC address of

 

 

your network card to his / her access point’s list.

 

 

 

The network is slow / having

1.

Move closer to the place where access point is located.

 

 

 

- 63 -

Image 64
Contents 802.11b/g/Draft 2.0-N Wireless LAN PCI Card Copyright Catalog Introduction and safety information Chapter I Product InformationSafety Information Please Keep this Network Card OUT the Reach of ChildrenFamiliar with your new wireless network card Package ContentsSystem Requirements Chapter II Driver Installation and Configuration Network Card InstallationPage Optimize for WiFi mode Optimize for performance mode Page Here Connect to Wireless Access Point Using Edimax UtilityHere are descriptions of every setup item Tips Page Page Page Using Windows Zero Configuration Page Page Make a profile for an access point or wireless device Connection Profile ManagementPage You can set the parameter for this connection here Here are descriptions of every setup items Page Here are descriptions of every setup items WPA Page Using 802.1x Certification Page Using 802.1x CA Server Connection will be View Network Statistics and Link Status Network StatisticsLink Status Page Advanced Settings Here are descriptions of every setup items Page QoS Setting WMM Enable Page WPS Configuration WPS Setup PBC Push-Button Configuration Page Page WPS Setup PIN Page About Please click ‘OK’ to close configuration utility Chapter III Soft-AP Function Page Ssid Spain Page Security Settings Support WPA encryption Access Control Here are descriptions of every setup items Connection Table Here are descriptions of every field Page Statistics Hardware Specification Chapter IV AppendixTroubleshooting Page What is the Ieee 802.11g standard? GlossaryWhat is WEP? What is WMM? Federal Communication Commission Interference Statement FCC and Other Compliance StatementsEU Countries Not intended for use

g, Draft 2.0-N, 802.11 b specifications

Edimax Technology has established a solid reputation in the networking industry, primarily known for its innovative products and commitment to quality. Among its many offerings, the Edimax 802.11 b/Draft 2.0-N series stands out as a reliable solution for enhancing wireless connectivity in various environments. This product line seamlessly combines the old and new technologies, delivering robust performance for users seeking high-speed internet access.

The Edimax 802.11 b/Draft 2.0-N technology integrates the original 802.11b standard with the more advanced Draft 2.0-N specifications. This hybrid approach provides backward compatibility with existing 802.11b devices, ensuring that users can maintain connectivity without the need for immediate upgrades to their hardware. This characteristic is particularly appealing to businesses and home users that may have legacy devices still in operation.

One of the main features of Edimax's 802.11 b/Draft 2.0-N technology is its high-speed wireless networking capability. With maximum theoretical speeds reaching up to 300 Mbps, users can experience significantly faster data transmission rates compared to traditional 802.11b networks. This increased throughput is essential for today's internet demands, which often involve streaming media, online gaming, and large file transfers.

Incorporating MIMO (Multiple Input Multiple Output) technology, Edimax's 802.11 b/Draft 2.0-N devices improve network reliability and range. MIMO technology utilizes multiple antennas to send and receive data, effectively increasing the capacity of the wireless connection. This leads to better performance in environments with numerous obstacles or multiple users, as the signal quality remains strong and stable.

Another noteworthy aspect of Edimax's offering is its focus on security features. The 802.11 b/Draft 2.0-N series includes the latest encryption protocols, such as WPA2 (Wi-Fi Protected Access 2), which protects user data from unauthorized access. This is particularly important for businesses handling sensitive information while ensuring that all users feel secure when connecting to the network.

Edimax's technology is characterized by its ease of installation and user-friendly interface. Most devices in the 802.11 b/Draft 2.0-N series include a simple setup wizard that guides users through the configuration process, allowing even those with minimal technical expertise to establish a secure and efficient wireless network.

In summary, Edimax Technology's 802.11 b/Draft 2.0-N devices represent a smart choice for individuals and organizations looking to enhance their wireless networking experience. Leveraging a unique blend of legacy compatibility, high-speed capabilities, advanced technologies like MIMO, and robust security features, this product line effectively addresses modern connectivity needs while ensuring user-friendly operation.